|
| 1 |
Does computer-aided diagnostic endoscopy improve the detection of commonly missed polyps? A meta-analysis
Arun Sivananthan, Scarlet Nazarian, Lakshmana Ayaru, Kinesh Patel, Hutan Ashrafian, Ara Darzi, Nisha Patel
Clin Endosc.2022;55(3):355-364. Published online 2022 May 12
DOI: http://dx.doi.org/10.5946/ce.2021.228
|
|
| 2 |
Comparative evaluation of the subtractive and additive manufacturing on the color stability of fixed provisional prosthesis materials
Young-Ji Lee, Sang-Chun Oh
|
|
| 3 |
The Judgement for Development of Virtual Surgical Planning and Three-Dimensional Bio-Printing for Superior Reconstruction of Mandibular Defect by Fibular Graft on Head-Neck Cancer
Nadia Sultana Shuborna, Bishwa Prakash Bhattarai, Teeranut Chaiyasamut, Sirichai Kiattavornchareon, Natthamet Wongsirichat
|
|
| 4 |
CAD/CAM을 이용한 전치부 수복시 색조 및 표면 특성의 개별화를 시행한 증례
Hyun-Jung Kim, Ji-Hyun Jang, Gil-Joo Ryu, Kyoung-Kyu Choi, Duck-Su Kim
|
|
| 5 |
The application of “bone window technique” using piezoelectric saws and a CAD/CAM-guided surgical stent in endodontic microsurgery on a mandibular molar case
Ukseong Kim, Sunil Kim, Euiseong Kim
|
|
| 6 |
Introduction to digital pathology and computer-aided pathology
Soojeong Nam, Yosep Chong, Chan Kwon Jung, Tae-Yeong Kwak, Ji Youl Lee, Jihwan Park, Mi Jung Rho, Heounjeong Go
|
|
| 7 |
Computer-Aided Diagnosis System for the Evaluation of Thyroid Nodules on Ultrasonography: Prospective Non-Inferiority Study according to the Experience Level of Radiologists
Sae Rom Chung, Jung Hwan Baek, Min Kyoung Lee, Yura Ahn, Young Jun Choi, Tae-Yon Sung, Dong Eun Song, Tae Yong Kim, Jeong Hyun Lee
Korean J Radiol.2020;21(3):369-376. Published online 2020 February 11
DOI: http://dx.doi.org/10.3348/kjr.2019.0581
|
|
| 8 |
Web-Based Spine Segmentation Using Deep Learning in Computed Tomography Images
Young Jae Kim, Bilegt Ganbold, Kwang Gi Kim
|
|
| 9 |
Full mouth rehabilitation of a severely worn dentition using intraoral scanner and the CAD/CAM double scanning technique
Se-Na Yoon, Jung-Suk Han, In-Sung Yeo, Hyung-In Yoon
|
|
| 10 |
Feasibility of fully automated classification of whole slide images based on deep learning
Kyung-Ok Cho, Sung Hak Lee, Hyun-Jong Jang
|
|
| 11 |
A new method to measure the accuracy of intraoral scanners along the complete dental arch: A pilot study
Mikel Iturrate, Erlantz Lizundia, Xabier Amezua, Eneko Solaberrieta
|
|
| 12 |
Evaluation of marginal adaptation in three-unit frameworks fabricated with conventional and powder-free digital impression techniques
Hasan Kocaağaoğlu, Haydar Albayrak, Sezgi Cinel Sahin, Ayşegül Güleryüz Gürbulak
|
|
| 13 |
Fabrication of additive manufacturing interim denture and comparison with conventional interim denture: A case report
Hyun-Ah Kim, Hyun-Pil Lim, Hyeon Kang, Hongso Yang, Sang-Won Park, Kwi-Dug Yun
|
|
| 14 |
The fabrication of abutment crowns for existing removable partial denture using CAD/CAM: A clinical report
Min-Jeong Chae, Cheong-Hee Lee
|
|
| 15 |
Full mouth rehabilitation in a patient with peri-implantitis: A case report
Nak-Hyun Choi, Young-Eun Cho, Eun-Jin Park
|
|
| 16 |
Computer-aided design and manufacturing-based full mouth rehabilitation for a patient with excessive attrition and restricted vertical dimension: A case report
Jun-Ho Cho, Hyung-In Yoon, In-Sung Yeo, Jung-Suk Han
|
|
| 17 |
Influence of different universal adhesives on the repair performance of hybrid CAD-CAM materials
Gülbike Demirel, İsmail Hakkı Baltacıoğlu
|
|
| 18 |
In vivo wear determination of novel CAD/CAM ceramic crowns by using 3D alignment
Akın Aladağ, Didem Oğuz, Muharrem Erhan Çömlekoğlu, Ender Akan
|
|
| 19 |
Physical characteristics of ceramic/glass-polymer based CAD/CAM materials: Effect of finishing and polishing techniques
Mugem Asli Ekici, Ferhan Egilmez, Isil Cekic-Nagas, Gulfem Ergun
|
|
| 20 |
Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorations
Ki-Won Jeong, Sung-Hun Kim
|
|
