10 results  1 of 1 

1 Evaluation of marginal and internal gap of three-unit metal framework according to subtractive manufacturing and additive manufacturing of CAD/CAM systems
Dong-Yeon Kim, Eo-Bin Kim, Hae-Young Kim, Ji-Hwan Kim, Woong-Chul Kim
J Adv Prosthodont.2017;9(6):463-469.   Published online 2017 December 14     DOI: http://dx.doi.org/10.4047/jap.2017.9.6.463
      
2 Evaluation of marginal and internal gaps in single and three-unit metal frameworks made by micro-stereolithography
Dong-Yeon Kim, Ha-Na Lee, Ji-Hwan Kim, Hae-Young Kim, Woong-Chul Kim
J Adv Prosthodont.2017;9(4):239-243.   Published online 2017 August 16     DOI: http://dx.doi.org/10.4047/jap.2017.9.4.239
      
3 Evaluation of the marginal and internal gaps of three different dental prostheses: comparison of the silicone replica technique and three-dimensional superimposition analysis
Jin-Young Park, So-Yeon Bae, Jae-Jun Lee, Ji-Hwan Kim, Hae-Young Kim, Woong-Chul Kim
J Adv Prosthodont.2017;9(3):159-169.   Published online 2017 June 19     DOI: http://dx.doi.org/10.4047/jap.2017.9.3.159
      
4 Evaluation of marginal and internal gaps of Ni-Cr and Co-Cr alloy copings manufactured by microstereolithography
Dong-Yeon Kim, Chong-Myeong Kim, Ji-Hwan Kim, Hae-Young Kim, Woong-Chul Kim
J Adv Prosthodont.2017;9(3):176-181.   Published online 2017 June 19     DOI: http://dx.doi.org/10.4047/jap.2017.9.3.176
      
5 Marginal and internal fit of nano-composite CAD/CAM restorations
So-Hyun Park, Yeon-Jee Yoo, Yoo-Jin Shin, Byeong-Hoon Cho, Seung-Ho Baek
Restor Dent Endod.2016;41(1):37-43.   Published online 2016 January 19     DOI: http://dx.doi.org/10.5395/rde.2016.41.1.37
      
6 Comparison of prosthetic models produced by traditional and additive manufacturing methods
Jin-Young Park, Hae-Young Kim, Ji-Hwan Kim, Jae-Hong Kim, Woong-Chul Kim
J Adv Prosthodont.2015;7(4):294-302.   Published online 2015 August 18     DOI: http://dx.doi.org/10.4047/jap.2015.7.4.294
      
7 Clinical gap changes after porcelain firing cycles of zirconia fixed dentures
Bugurman Burcu Bugurman, Sebnem Begum Turker
J Adv Prosthodont.2014;6(3):177-184.   Published online 2014 June 24     DOI: http://dx.doi.org/10.4047/jap.2014.6.3.177
      
8 Evaluation of different approaches for using a laser scanner in digitization of dental impressions
Wan-Sun Lee, Woong-Chul Kim, Hae-Young Kim, Wook-Tae Kim, Ji-Hwan Kim
J Adv Prosthodont.2014;6(1):22-29.   Published online 2014 February 14     DOI: http://dx.doi.org/10.4047/jap.2014.6.1.22
      
9 A comparison of the fidelity of various zirconia-based all-ceramic crowns fabricated with CAD/CAM systems
Sung-Jun Kim, Kwang-Hun Jo, Kyu-Bok Lee
J Korean Acad Prosthodont.2009;47(2):148-155.   Published online 2009 December 18     DOI: http://dx.doi.org/10.4047/jkap.2009.47.2.148
   
10 Influence of three different preparation designs on the marginal and internal gaps of CEREC3 CAD/CAM inlays
Deog-Gyu Seo, Young-Ah Yi, Yoon Lee, Byoung-Duck Roh
J Korean Acad Conserv Dent.2009;34(3):177-183.   Published online 2009 May 31     DOI: http://dx.doi.org/10.5395/JKACD.2009.34.3.177
      

 1 of 1