|
| 1 |
Comparative evaluation of the subtractive and additive manufacturing on the color stability of fixed provisional prosthesis materials
Young-Ji Lee, Sang-Chun Oh
|
|
| 2 |
Review on additive manufacturing of dental materials
Sun Won, Hyeon-Goo Kang, Kyung-Ho Ko, Yoon-Hyuk Huh, Chan-Jin Park, Lee-Ra Cho
|
|
| 3 |
CAD/CAM을 이용한 전치부 수복시 색조 및 표면 특성의 개별화를 시행한 증례
Hyun-Jung Kim, Ji-Hyun Jang, Gil-Joo Ryu, Kyoung-Kyu Choi, Duck-Su Kim
|
|
| 4 |
The application of “bone window technique” using piezoelectric saws and a CAD/CAM-guided surgical stent in endodontic microsurgery on a mandibular molar case
Ukseong Kim, Sunil Kim, Euiseong Kim
|
|
| 5 |
Full mouth rehabilitation of a severely worn dentition using intraoral scanner and the CAD/CAM double scanning technique
Se-Na Yoon, Jung-Suk Han, In-Sung Yeo, Hyung-In Yoon
|
|
| 6 |
Marginal and internal discrepancy of 3-unit fixed dental prostheses fabricated by subtractive and additive manufacturing
Jae-Won Choi
|
|
| 7 |
A new method to measure the accuracy of intraoral scanners along the complete dental arch: A pilot study
Mikel Iturrate, Erlantz Lizundia, Xabier Amezua, Eneko Solaberrieta
|
|
| 8 |
Evaluation of marginal adaptation in three-unit frameworks fabricated with conventional and powder-free digital impression techniques
Hasan Kocaağaoğlu, Haydar Albayrak, Sezgi Cinel Sahin, Ayşegül Güleryüz Gürbulak
|
|
| 9 |
Fabrication of additive manufacturing interim denture and comparison with conventional interim denture: A case report
Hyun-Ah Kim, Hyun-Pil Lim, Hyeon Kang, Hongso Yang, Sang-Won Park, Kwi-Dug Yun
|
|
| 10 |
The fabrication of abutment crowns for existing removable partial denture using CAD/CAM: A clinical report
Min-Jeong Chae, Cheong-Hee Lee
|
|
| 11 |
Full mouth rehabilitation in a patient with peri-implantitis: A case report
Nak-Hyun Choi, Young-Eun Cho, Eun-Jin Park
|
|
| 12 |
Computer-aided design and manufacturing-based full mouth rehabilitation for a patient with excessive attrition and restricted vertical dimension: A case report
Jun-Ho Cho, Hyung-In Yoon, In-Sung Yeo, Jung-Suk Han
|
|
| 13 |
Effects of Hand Moxibustion and Hand Press Pellet on Low Back Pain, Range of Joint Movement, and Depression
Yeoun Ok Kim, Soon Ock Choi, Jee Won Kim
|
|
| 14 |
Comparison analysis of fracture load and flexural strength of provisional restorative resins fabricated by different methods
Won-Tak Cho, Jae-Won Choi
|
|
| 15 |
In vivo wear determination of novel CAD/CAM ceramic crowns by using 3D alignment
Akın Aladağ, Didem Oğuz, Muharrem Erhan Çömlekoğlu, Ender Akan
|
|
| 16 |
Physical characteristics of ceramic/glass-polymer based CAD/CAM materials: Effect of finishing and polishing techniques
Mugem Asli Ekici, Ferhan Egilmez, Isil Cekic-Nagas, Gulfem Ergun
|
|
| 17 |
Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorations
Ki-Won Jeong, Sung-Hun Kim
|
|
| 18 |
In vitro evaluation of the wear resistance of provisional resin materials fabricated by different methods
Jong-Ju Ahn, Jung-Bo Huh, Jae-Won Choi
|
|
| 19 |
Functional and esthetic improvement through reconstruction of anterior guidance using the modified Dahl principle and copy-milled technique of CAD/CAM system: A case report
Sung-Ho Kim, Yu-Sung Choi
|
|
| 20 |
Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method
Suji Lee, Seoung-Jin Hong, Janghyun Paek, Ahran Pae, Kung-Rock Kwon, Kwantae Noh
|
|
