|
| 1 |
Marginal and internal fit of interim crowns fabricated with 3D printing and milling method
Young-Tak Son, KeunBaDa Son, Kyu-Bok Lee
|
|
| 2 |
Effect of additional firing process after sintering of monolithic zirconia crown on marginal and internal fitness
Mi-Sun Shin, Hyeonjong Lee
|
|
| 3 |
Comparison of the marginal fit of milled yttrium stabilized zirconium dioxide crowns obtained by scanning silicone impressions and by scanning stone replicas
Estefanía Aranda Yus, Josep Maria Anglada Cantarell, Antonio Miñarro Alonso
|
|
| 4 |
Marginal and internal fit of all ceramic crown using the replica technique and the triple-scan protocol
Mi-Sun Shin, Jang-Hoon Lee
|
|
| 5 |
In vitro evaluation methods on adaptation of fixed dental prosthesis
Hyunho Lee, Du-Hyeong Lee, Kyu-Bok Lee
|
|
| 6 |
Comparison of micro CT and cross-section technique for evaluation of marginal and internal fit of lithium disilicate crowns
In-Seok Ko, Jeong-Mi Kim, Hye-Won Cho
|
|
| 7 |
Study on methodology for the assessment of internal and marginal adaptation on fixed dental prosthesis
Se-Wook Pyo, Jun-Jae Lee, Jung-Suk Han, Young-Jun Lim
|
|
| 8 |
Evaluation of marginal fit of 2 CAD-CAM anatomic contour zirconia crown systems and lithium disilicate glass-ceramic crown
Min-Kyung Ji, Ji-Hee Park, Sang-Won Park, Kwi-Dug Yun, Gye-Jeong Oh, Hyun-Pil Lim
|
|
| 9 |
The effect of various veneering techniques on the marginal fit of zirconia copings
Kianoosh Torabi, Mahroo Vojdani, Rashin Giti, Masumeh Taghva, Soheil Pardis
|
|
| 10 |
Effect of anatomic, semi-anatomic and non-anatomic occlusal surface tooth preparations on the adaptation of zirconia copings
Syed Rashid Habib, Waleed Asiri, Mohammed Jameel Hefne
|
|
| 11 |
Gap comparison between single crown and three-unit bridge zirconia substructures
Chuchai Anunmana, Masnisa Charoenchitt, Chanavut Asvanund
|
|
| 12 |
Marginal fit of anterior 3-unit fixed partial zirconia restorations using different CAD/CAM systems
Tae-Jin Song, Taek-Ka Kwon, Jae-Ho Yang, Jung-Suk Han, Jai-Bong Lee, Sung-Hun Kim, In-Sung Yeo
|
|
| 13 |
A study on the marginal fit of CAD/CAM 3-unit bridges
Ki-Hong Lee, In-Sung Yeo, Sung-Hun Kim, Jung-Suk Han, Jai-Bong Lee, Jae-Ho Yang
|
|
| 14 |
Marginal fit of three-unit zirconia anterior fixed dental prostheses fabricated using CAD/CAM and MAD/MAM system
Tae-Jin Song, In-Sung Yeo, Jae-Ho Yang
|
|
| 15 |
Marginal and internal fitness of three-unit zirconia cores fabricated using several CAD/CAM systems
Jung-Bo Huh, U Sic Kim, Ha-Young Kim, Jong-Eun Kim, Jeong-Yeol Lee, Young-Su Kim, Young-Chan Jeon, Sang-Wan Shin
|
|
| 16 |
Evaluation using Replica Technique on the marginal and internal fitness of zirconia cores by several CAD/CAM systems
Jung-Bo Huh, Cheong-Gil Park, Ha-Young Kim, Chan-Kyung Park, Sang-Wan Shin
|
|
| 17 |
Adaptability of zirconia core fabricated by cold isostatic pressing
Yoon-Jeong Seo, Kwi-Dug Yun, Kim Hyun-Seung, Sang-Won Park
|
|
| 18 |
Influence of porcelain veneering on the marginal fit of Digident and Lava CAD/CAM zirconia ceramic crowns
Hyun-Soon Pak, Jung-Suk Han, Jai-Bong Lee, Sung-Hun Kim, Jae-Ho Yang
|
|
| 19 |
Fracture load and marginal fitness of zirconia ceramic coping by design and coloration
Mee-Ran Shin, Min-Jeong Kim, Sang-Chun Oh
|
|
| 20 |
Comparison of marginal fit before and after porcelain build-up of two kinds of CAD/CAM zirconia all-ceramic restorations
Ho-Sik Shin, Seok-Gyu Kim
|
|
