17 results  1 of 1 

1 A new method to measure the accuracy of intraoral scanners along the complete dental arch: A pilot study
Mikel Iturrate, Erlantz Lizundia, Xabier Amezua, Eneko Solaberrieta
J Adv Prosthodont.2019;11(6):331-340.   Published online 2019 December 18     DOI: http://dx.doi.org/10.4047/jap.2019.11.6.331
      
2 Fabrication of additive manufacturing interim denture and comparison with conventional interim denture: A case report
Hyun-Ah Kim, Hyun-Pil Lim, Hyeon Kang, Hongso Yang, Sang-Won Park, Kwi-Dug Yun
J Korean Acad Prosthodont.2019;57(4):483-489.   Published online 2019 October 25     DOI: http://dx.doi.org/10.4047/jkap.2019.57.4.483
      
3 The fabrication of abutment crowns for existing removable partial denture using CAD/CAM: A clinical report
Min-Jeong Chae, Cheong-Hee Lee
J Korean Acad Prosthodont.2019;57(4):490-494.   Published online 2019 October 25     DOI: http://dx.doi.org/10.4047/jkap.2019.57.4.490
      
4 Full mouth rehabilitation in a patient with peri-implantitis: A case report
Nak-Hyun Choi, Young-Eun Cho, Eun-Jin Park
J Korean Acad Prosthodont.2019;57(4):416-424.   Published online 2019 October 25     DOI: http://dx.doi.org/10.4047/jkap.2019.57.4.416
      
5 Computer-aided design and manufacturing-based full mouth rehabilitation for a patient with excessive attrition and restricted vertical dimension: A case report
Jun-Ho Cho, Hyung-In Yoon, In-Sung Yeo, Jung-Suk Han
J Korean Acad Prosthodont.2019;57(4):495-505.   Published online 2019 October 25     DOI: http://dx.doi.org/10.4047/jkap.2019.57.4.495
      
6 Physical characteristics of ceramic/glass-polymer based CAD/CAM materials: Effect of finishing and polishing techniques
Mugem Asli Ekici, Ferhan Egilmez, Isil Cekic-Nagas, Gulfem Ergun
J Adv Prosthodont.2019;11(2):128-137.   Published online 2019 April 26     DOI: http://dx.doi.org/10.4047/jap.2019.11.2.128
      
7 Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method
Suji Lee, Seoung-Jin Hong, Janghyun Paek, Ahran Pae, Kung-Rock Kwon, Kwantae Noh
J Adv Prosthodont.2019;11(1):55-64.   Published online 2019 February 26     DOI: http://dx.doi.org/10.4047/jap.2019.11.1.55
      
8 Advancements in craniofacial prosthesis fabrication: A narrative review of holistic treatment
Hossein E. Jazayeri, Steve Kang, Radi M. Masri, Lauren Kuhn, Farahnaz Fahimipour, Rabecca Vanevenhoven, Geoffrey Thompson, Maryam Gheisarifar, Mohammadreza Tahriri, Lobat Tayebi
J Adv Prosthodont.2018;10(6):430-439.   Published online 2018 December 19     DOI: http://dx.doi.org/10.4047/jap.2018.10.6.430
      
9 Influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with a lingual slot
Kyu-Hyung Choi, KeunBaDa Son, Du-Hyeong Lee, Kyu-Bok Lee
J Adv Prosthodont.2018;10(5):381-387.   Published online 2018 October 22     DOI: http://dx.doi.org/10.4047/jap.2018.10.5.381
      
10 Surface deterioration of monolithic CAD/CAM restorative materials after artificial abrasive toothbrushing
Nazmiye Şen, Betül Tuncelli, Gültekin Göller
J Adv Prosthodont.2018;10(4):271-278.   Published online 2018 August 17     DOI: http://dx.doi.org/10.4047/jap.2018.10.4.271
      
11 The effect of light sources and CAD/CAM monolithic blocks on degree of conversion of cement
Aydan Boztuna Çetindemir, Bülent Şermet, Değer Öngül
J Adv Prosthodont.2018;10(4):291-299.   Published online 2018 August 17     DOI: http://dx.doi.org/10.4047/jap.2018.10.4.291
      
12 Evaluation of the reproducibility of various abutments using a blue light model scanner
Dong-Yeon Kim, Kyung-Eun Lee, Jin-Hun Jeon, Ji-Hwan Kim, Woong-Chul Kim
J Adv Prosthodont.2018;10(4):328-334.   Published online 2018 August 17     DOI: http://dx.doi.org/10.4047/jap.2018.10.4.328
      
13 The effect of sandblasting duration on the bond durability of dual-cure adhesive cement to CAD/CAM resin restoratives
Neslihan Tekçe, Safa Tuncer, Mustafa Demirci
J Adv Prosthodont.2018;10(3):211-217.   Published online 2018 June 12     DOI: http://dx.doi.org/10.4047/jap.2018.10.3.211
      
14 Accuracy evaluation of dental models manufactured by CAD/CAM milling method and 3D printing method
Yoo-Geum Jeong, Wan-Sun Lee, Kyu-Bok Lee
J Adv Prosthodont.2018;10(3):245-251.   Published online 2018 June 12     DOI: http://dx.doi.org/10.4047/jap.2018.10.3.245
      
15 Comparison of the marginal fit of milled yttrium stabilized zirconium dioxide crowns obtained by scanning silicone impressions and by scanning stone replicas
Estefanía Aranda Yus, Josep Maria Anglada Cantarell, Antonio Miñarro Alonso
J Adv Prosthodont.2018;10(3):236-244.   Published online 2018 June 12     DOI: http://dx.doi.org/10.4047/jap.2018.10.3.236
      
16 Esthetic restoration in continuous maxillary anterior area using immediate implant placement: A case report
Ye Chan Lee, Jun Sung Shim, Jae Hoon Lee, Keun Woo Lee
J Korean Acad Prosthodont.2017;55(4):403-409.   Published online 2017 October 26     DOI: http://dx.doi.org/10.4047/jkap.2017.55.4.403
      
17 Full-mouth rehabilitation in an amelogenesis imperfecta patient with anterior open bite using CAD/CAM system
Sang-Hoon Lee, Yang-Jin Yi, Deuk-Won Jo
J Korean Acad Prosthodont.2017;55(4):410-418.   Published online 2017 October 26     DOI: http://dx.doi.org/10.4047/jkap.2017.55.4.410
      

 1 of 1