|
| 1 |
Medical Applications of 3D Printing and Standardization Issues
Kyu Won Shim
|
|
| 2 |
Comparison of shear bond strength between hard relining material and 3D-printing denture base resin containing silica micro-gel
Yeon-Woo Lee, Young-Gyun Song
|
|
| 3 |
Evaluation of fracture strength and translucency of 3D printing resin crown for carious primary anterior tooth
Young-Jun Ham, Joon-Haeng Lee, Jong-Su Kim, Jong-Bin Kim, Mi-Ran Han, Ji-Sun Shin
|
|
| 4 |
Three-dimensional printing of temporary crowns with polylactic acid polymer using the fused deposition modeling technique: a case series
Eun-Kyong Kim, Eun Young Park, Sohee Kang
|
|
| 5 |
Efficacy of 3D-printed simulation models of unruptured intracranial aneurysms in patient education and surgical simulation
Seung-Bin Woo, Chang-Young Lee, Chang-Hyun Kim, Min-Yong Kwon, Young San Ko, Jong-Ha Lee, Jin-Chul Heo, Sae Min Kwon
|
|
| 6 |
3D printed interim immediate denture by using the occlusal plane digital transfer method of the POP BOW system in a patient planning to extract upper and lower residual teeth: a case report
Do-Hyun Park, Eun-Bin Bae, In-Hwan Jung, Chang-Mo Jeong, Mi-Jung Yun, Jung-Bo Huh, So-Hyoun Lee
|
|
| 7 |
Congenital Heart Surgery Skill Training Using Simulation Models: Not an Option but a Necessity
Shi-Joon Yoo, Nabil Hussein, David J. Barron
|
|
| 8 |
Application of Three Dimensional-Printed Polycaprolactone Nasal Mesh With the Figure of 8 Anchoring Suture Technique for Correction of Caudal Septal Subluxation
Seok-Youl Choi, Jee Won Moon, Su-Jong Kim, Jae-Min Shin, Il-Ho Park
|
|
| 9 |
3D-Printed Disease Models for Neurosurgical Planning, Simulation, and Training
Chul-Kee Park
|
|
| 10 |
Dosimetric Study Using Patient-Specific Three-Dimensional-Printed Head Phantom with Polymer Gel in Radiation Therapy
Yona Choi, Kook Jin Chun, Eun San Kim, Young Jae Jang, Ji-Ae Park, Kum Bae Kim, Geun Hee Kim, Sang Hyoun Choi
Prog Med Phys.2021;32(4):99-106. Published online 2021 December 31
DOI: http://dx.doi.org/10.14316/pmp.2021.32.4.99
|
|
| 11 |
A comparison study on shear bond strength of 3D printed resin and conventional heat-cured denture base resin to denture relining materials
Sung-Yoon Cho, Young-Gyun Song
|
|
| 12 |
Three-Dimensional Printing Assisted Preoperative Surgical Planning for Cerebral Arteriovenous Malformation
Inan Uzunoglu, Ceren Kızmazoglu, Resit Buğra Husemoglu, Gokhan Gurkan, Cansu Uzunoglu, Murat Atar, Volkan Cakır, Hasan Emre Aydın, Murat Sayın, Nurullah Yuceer
|
|
| 13 |
A study on the shear bond strength between 3D printed resin and provisional resin after thermal cycling
Ji-Hun Yim, Soo-Yeon Shin
|
|
| 14 |
Pre-contoured reconstruction plate fabricated via three-dimensional printed bending support
In-Seok Song, Jae-Jun Ryu, Young-Jun Choi, Ui-Lyong Lee
|
|
| 15 |
Application of three-dimensional printing for intraoperative guidance during liver resection of a hepatocellular carcinoma with sophisticated location
Jinsoo Rhu, Mi Seung Kim, Sangjin Kim, Gyu-Seong Choi, Jong Man Kim, Jae-Won Joh
|
|
| 16 |
Prediction of endotracheal tube size using a printed three-dimensional airway model in pediatric patients with congenital heart disease: a prospective, single-center, single-group study
Seyeon Park, Jisoo Ahn, Sung Uk Yoon, Ki Seok Choo, Hye-Jin Kim, Minwoo Chung, Hee Young Kim
|
|
| 17 |
Cr-Co removable partial denture treatment fabricated by selective laser melting: a case report
Ji-Hun Yim, Soo-Yeon Shin
|
|
| 18 |
The Judgement for Development of Virtual Surgical Planning and Three-Dimensional Bio-Printing for Superior Reconstruction of Mandibular Defect by Fibular Graft on Head-Neck Cancer
Nadia Sultana Shuborna, Bishwa Prakash Bhattarai, Teeranut Chaiyasamut, Sirichai Kiattavornchareon, Natthamet Wongsirichat
|
|
| 19 |
Late reconstruction of extensive orbital floor fracture with a patient-specific implant in a bombing victim
Maximiliaan Smeets, Robin Snel, Yi Sun, Titiaan Dormaar, Constantinus Politis
|
|
| 20 |
CAD/CAM 의치상 레진과 열중합 의치상 레진의 두께에 따른 굴곡 강도 비교
Dong-Hyung Lee, Joon-Seok Lee
|
|
