14 results  1 of 1 

1 Comparative evaluation of marginal and internal fit of metal copings fabricated by various CAD/CAM methods
Seung-Jin Jeong, Hye-Won Cho, Ji-Hye Jung, Jeong-Mi Kim, Yu-Lee Kim
J Korean Acad Prosthodont.2019;57(3):211-218.   Published online 2019 July 26     DOI: http://dx.doi.org/10.4047/jkap.2019.57.3.211
      
2 Early complications and performance of 327 heat-pressed lithium disilicate crowns up to five years
Fabian Huettig, Ulf Peter Gehrke
J Adv Prosthodont.2016;8(3):194-200.   Published online 2016 June 17     DOI: http://dx.doi.org/10.4047/jap.2016.8.3.194
      
3 Evaluation and comparison of the marginal adaptation of two different substructure materials
Tahir Karaman, Sabiha Zelal Ulku, Ali Ihsan Zengingul, Sedat Guven, Veysel Eratilla, Ebru Sumer
J Adv Prosthodont.2015;7(3):257-263.   Published online 2015 June 23     DOI: http://dx.doi.org/10.4047/jap.2015.7.3.257
      
4 Influence of the accuracy of abutment tooth preparation on the marginal adaptation of Co-Cr alloy copings fabricated with a selective laser sintering technology
Seo-Rahng Kim, Jai-Young Koak, Seong-Joo Heo, Seong-Kyun Kim, Myung-Joo Kim
J Korean Acad Prosthodont.2015;53(4):337-344.   Published online 2015 February 9     DOI: http://dx.doi.org/10.4047/jkap.2015.53.4.337
   
5 The effect of heat and press-on-metal technique on marginal fit of metal-ceramic crown
Ji-Eun Kim, Se-Yeon Kim, Cheong-Hee Lee
J Korean Acad Prosthodont.2014;52(2):90-96.   Published online 2014 January 18     DOI: http://dx.doi.org/10.4047/jkap.2014.52.2.90
   
6 Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and three-dimensional replica techniques
Ki-Baek Kim, Jae-Hong Kim, Woong-Chul Kim, Hae-Young Kim, Ji-Hwan Kim
J Adv Prosthodont.2013;5(2):179-186.   Published online 2013 May 30     DOI: http://dx.doi.org/10.4047/jap.2013.5.2.179
      
7 Effect of various casting alloys and abutment composition on the marginal accuracy of bar-type retainer
Yun-Hui Lee, Young-Gyun Song, Joon-Seok Lee
J Korean Acad Prosthodont.2012;50(2):85-91.   Published online 2012 April 30     DOI: http://dx.doi.org/10.4047/jkap.2012.50.2.85
      
8 The use of definitive implant abutments for the fabrication of provisional crowns: a case series
Hakan Bilhan, Onur Geckili, Emre Mumcu
J Periodontal Implant Sci.2011;41(5):248-252.   Published online 2011 October 31     DOI: http://dx.doi.org/10.5051/jpis.2011.41.5.248
      
9 Comparative analysis of the clinical techniques used in evaluation of marginal accuracy of cast restoration using stereomicroscopy as gold standard
Abhishek Rastogi, Vikas Kamble
J Adv Prosthodont.2011;3(2):69-75.   Published online 2011 June 30     DOI: http://dx.doi.org/10.4047/jap.2011.3.2.69
      
10 Comparative study in marginal fit of a pressed ceramic and feldspathic porcelain fused to metal restoration
Yoon-Young Kim, Won-Hee Park, Dong-Yeob Yoo, Young-Soo Lee
J Korean Acad Prosthodont.2010;48(4):273-279.   Published online 2010 December 18     DOI: http://dx.doi.org/10.4047/jkap.2010.48.4.273
   
11 The effect of intermittent composite curing on marginal adaptation
Yong-Hwan Yun, Sung-Ho Park
J Korean Acad Conserv Dent.2007;32(3):248-259.   Published online 2007 May 31     DOI: http://dx.doi.org/10.5395/JKACD.2007.32.3.248
      
12 Estimation of relation between techniques of dye penetration for microleakage and SEM evaluation for marginal adaptation of the restoration
Soon-Joo Hwang, Dong-Hoon Shin
J Korean Acad Conserv Dent.2006;31(5):337-343.   Published online 2006 September 30     DOI: http://dx.doi.org/10.5395/JKACD.2006.31.5.337
      
13 A quantitative analysis about microleakage of all-in-one adhesives
Yong-Hee Kang, Soo-Il Shin, Dong-Hoon Shin
J Korean Acad Conserv Dent.2004;29(1):66-72.   Published online 2004 January 31     DOI: http://dx.doi.org/10.5395/JKACD.2004.29.1.066
      
14 Development of chewing simulator
Sung-Ho Park, Il-Young Jung, Kwon-Yong Lee
J Korean Acad Conserv Dent.2003;28(1):34-40.   Published online 2003 January 31     DOI: http://dx.doi.org/10.5395/JKACD.2003.28.1.034
      

 1 of 1