|
| 1 |
Related factors for the denture needs among platform workers in Seoul
Jae-In Ryu, Eun-Gyeong Cha
|
|
| 2 |
Comparison of shear bond strength between hard relining material and 3D-printing denture base resin containing silica micro-gel
Yeon-Woo Lee, Young-Gyun Song
|
|
| 3 |
Fabrication of maxillary complete denture and mandibular implant retained overdenture using CAD-CAM system and Monolithic disc: a case report
Jaehyeok Ro, Haemin Bang, Woohyung Jang, Chan Park, Hyun-Pil Lim, Sangwon Park, Kwi-Dug Yun
|
|
| 4 |
Evaluation of the dimensional change of 3D-printed complete denture after post-curing
Suyeon Lee, Younghun Kwak, Eunchul Park, Heejung Kim
|
|
| 5 |
Fabrication of complete denture using CAD-based vertical dimension increase and monolithic disc: a case report
Hyeon Kim, Woohyung Jang, Chan Park, Kwi-Dug Yun, Hyun-Pil Lim, Sangwon Park
|
|
| 6 |
Strategies for dental aspiration and ingestion accidents that can lead to serious complications: a report of three cases and a review of articles
Youngjin Shin, Sung ok Hong, Rayeon Kim, Yu-jin Jee
|
|
| 7 |
3D printed interim immediate denture by using the occlusal plane digital transfer method of the POP BOW system in a patient planning to extract upper and lower residual teeth: a case report
Do-Hyun Park, Eun-Bin Bae, In-Hwan Jung, Chang-Mo Jeong, Mi-Jung Yun, Jung-Bo Huh, So-Hyoun Lee
|
|
| 8 |
Mandibular implant assisted removable partial denture with a small number of implant crowns: two case reports
Youla Kim, Suyoung Lee
|
|
| 9 |
A treatment of drug resistant denture stomatitis by microbiological analysis and adjuvant therapy: a case report
Young-Gyun Song
|
|
| 10 |
A comparison study on shear bond strength of 3D printed resin and conventional heat-cured denture base resin to denture relining materials
Sung-Yoon Cho, Young-Gyun Song
|
|
| 11 |
A useful method of using the healing abutments for interocclusal records in implant overdenture: a case report
Hyunsuk Choi, Sohee Kang
|
|
| 12 |
Cr-Co removable partial denture treatment fabricated by selective laser melting: a case report
Ji-Hun Yim, Soo-Yeon Shin
|
|
| 13 |
CAD/CAM 의치상 레진과 열중합 의치상 레진의 두께에 따른 굴곡 강도 비교
Dong-Hyung Lee, Joon-Seok Lee
|
|
| 14 |
Three-dimensional printed complete denture fabrication using the scan data from the conventional denture-making process
Hyun-Min Kim, Jong-Jin Kim, Joo-Hee Lee, Hyun-Suk Cha, Jin Baik
|
|
| 15 |
Analysis of the difference between regions of frequency of scaling and denture use in the elderly and related factors at the regional level
Jin-Sun Choi, Se-Hwan Jung
|
|
| 16 |
상악의 임플란트 고정성 보철물과 후방연장 국소의치를 이용하여 수복한 10년 경과 관찰 증례
Ri Ryu, Yeon-Hee Park, Won-suk Oh, Jung-Jin Lee, Ju-mi Park
|
|
| 17 |
Study of the fracture resistance of zirconia on posterior fixed partial dentures based on inter-abutment distance
Gi-Beom Park, Soo-Yeon Shin
|
|
| 18 |
Attitude and treatment options in implant-supported prosthetics: A survey among a cohort of German dentists
Carolin Glücker, Angelika Rauch, Sebastian Hahnel
|
|
| 19 |
Color stability of three dimensional-printed denture teeth exposed to various colorants
Eun-Sol Koh, Hyun-Suk Cha, Tae-Hyung Kim, Jin-Soo Ahn, Joo-Hee Lee
|
|
| 20 |
The treatment of an edentulous patient with conventional complete denture and CAD/CAM complete denture
Sungyoon Cho, Joonseok Lee
|
|
