|
| 1 |
A new method to measure the accuracy of intraoral scanners along the complete dental arch: A pilot study
Mikel Iturrate, Erlantz Lizundia, Xabier Amezua, Eneko Solaberrieta
|
|
| 2 |
Fabrication of additive manufacturing interim denture and comparison with conventional interim denture: A case report
Hyun-Ah Kim, Hyun-Pil Lim, Hyeon Kang, Hongso Yang, Sang-Won Park, Kwi-Dug Yun
|
|
| 3 |
The fabrication of abutment crowns for existing removable partial denture using CAD/CAM: A clinical report
Min-Jeong Chae, Cheong-Hee Lee
|
|
| 4 |
Full mouth rehabilitation in a patient with peri-implantitis: A case report
Nak-Hyun Choi, Young-Eun Cho, Eun-Jin Park
|
|
| 5 |
Computer-aided design and manufacturing-based full mouth rehabilitation for a patient with excessive attrition and restricted vertical dimension: A case report
Jun-Ho Cho, Hyung-In Yoon, In-Sung Yeo, Jung-Suk Han
|
|
| 6 |
Physical characteristics of ceramic/glass-polymer based CAD/CAM materials: Effect of finishing and polishing techniques
Mugem Asli Ekici, Ferhan Egilmez, Isil Cekic-Nagas, Gulfem Ergun
|
|
| 7 |
Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method
Suji Lee, Seoung-Jin Hong, Janghyun Paek, Ahran Pae, Kung-Rock Kwon, Kwantae Noh
|
|
| 8 |
Advancements in craniofacial prosthesis fabrication: A narrative review of holistic treatment
Hossein E. Jazayeri, Steve Kang, Radi M. Masri, Lauren Kuhn, Farahnaz Fahimipour, Rabecca Vanevenhoven, Geoffrey Thompson, Maryam Gheisarifar, Mohammadreza Tahriri, Lobat Tayebi
|
|
| 9 |
Influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with a lingual slot
Kyu-Hyung Choi, KeunBaDa Son, Du-Hyeong Lee, Kyu-Bok Lee
|
|
| 10 |
Surface deterioration of monolithic CAD/CAM restorative materials after artificial abrasive toothbrushing
Nazmiye Şen, Betül Tuncelli, Gültekin Göller
|
|
| 11 |
The effect of light sources and CAD/CAM monolithic blocks on degree of conversion of cement
Aydan Boztuna Çetindemir, Bülent Şermet, Değer Öngül
|
|
| 12 |
Evaluation of the reproducibility of various abutments using a blue light model scanner
Dong-Yeon Kim, Kyung-Eun Lee, Jin-Hun Jeon, Ji-Hwan Kim, Woong-Chul Kim
|
|
| 13 |
The effect of sandblasting duration on the bond durability of dual-cure adhesive cement to CAD/CAM resin restoratives
Neslihan Tekçe, Safa Tuncer, Mustafa Demirci
|
|
| 14 |
Accuracy evaluation of dental models manufactured by CAD/CAM milling method and 3D printing method
Yoo-Geum Jeong, Wan-Sun Lee, Kyu-Bok Lee
|
|
| 15 |
Comparison of the marginal fit of milled yttrium stabilized zirconium dioxide crowns obtained by scanning silicone impressions and by scanning stone replicas
Estefanía Aranda Yus, Josep Maria Anglada Cantarell, Antonio Miñarro Alonso
|
|
