|
| 1 |
Esthetic restoration of maxillary anterior fixed prosthesis using a digital diagnostic wax-up: a case report
Eunji Oh, Songyi Park, Woohyung Jang, Chan Park, Kwi-Dug Yun, Hyun-Pil Lim, Sangwon Park
|
|
| 2 |
Fabrication of maxillary complete denture and mandibular implant retained overdenture using CAD-CAM system and Monolithic disc: a case report
Jaehyeok Ro, Haemin Bang, Woohyung Jang, Chan Park, Hyun-Pil Lim, Sangwon Park, Kwi-Dug Yun
|
|
| 3 |
Fabrication of complete denture using CAD-based vertical dimension increase and monolithic disc: a case report
Hyeon Kim, Woohyung Jang, Chan Park, Kwi-Dug Yun, Hyun-Pil Lim, Sangwon Park
|
|
| 4 |
3D printed interim immediate denture by using the occlusal plane digital transfer method of the POP BOW system in a patient planning to extract upper and lower residual teeth: a case report
Do-Hyun Park, Eun-Bin Bae, In-Hwan Jung, Chang-Mo Jeong, Mi-Jung Yun, Jung-Bo Huh, So-Hyoun Lee
|
|
| 5 |
Maxillary space closure using a digital manufactured Mesialslider in a single appointment workflow
Lynn Wilhelmy, Jan H Willmann, Nour Eldin Tarraf, Benedict Wilmes, Dieter Drescher
Korean J Orthod.2022;52(3):236-245. Published online 2022 April 14
DOI: http://dx.doi.org/10.4041/kjod21.203
|
|
| 6 |
Innovative customized CAD/CAM nickel-titanium lingual retainer versus standard stainless-steel lingual retainer: A randomized controlled trial
Emilie Gelin, Laurence Seidel, Annick Bruwier, Adelin Albert, Carole Charavet
|
|
| 7 |
CAD/CAM 의치상 레진과 열중합 의치상 레진의 두께에 따른 굴곡 강도 비교
Dong-Hyung Lee, Joon-Seok Lee
|
|
| 8 |
The treatment of an edentulous patient with conventional complete denture and CAD/CAM complete denture
Sungyoon Cho, Joonseok Lee
|
|
| 9 |
Full mouth rehabilitation of a severely worn dentition using intraoral scanner and the CAD/CAM double scanning technique
Se-Na Yoon, Jung-Suk Han, In-Sung Yeo, Hyung-In Yoon
|
|
| 10 |
치아 삭제의 다른 자가 평가 방법 후 개선에 대한 비교 연구
JungHan Kim, Keunbada Son, Kyu-Bok Lee
|
|
| 11 |
Comparison of CAD/CAM abutment and prefabricated abutment in Morse taper internal type implant after cyclic loading: Axial displacement, removal torque, and tensile removal force
Yuseung Yi, Seong-Joo Heo, Jai-Young Koak, Seong-Kyun Kim
|
|
| 12 |
A new method to measure the accuracy of intraoral scanners along the complete dental arch: A pilot study
Mikel Iturrate, Erlantz Lizundia, Xabier Amezua, Eneko Solaberrieta
|
|
| 13 |
Fabrication of additive manufacturing interim denture and comparison with conventional interim denture: A case report
Hyun-Ah Kim, Hyun-Pil Lim, Hyeon Kang, Hongso Yang, Sang-Won Park, Kwi-Dug Yun
|
|
| 14 |
The fabrication of abutment crowns for existing removable partial denture using CAD/CAM: A clinical report
Min-Jeong Chae, Cheong-Hee Lee
|
|
| 15 |
Full mouth rehabilitation in a patient with peri-implantitis: A case report
Nak-Hyun Choi, Young-Eun Cho, Eun-Jin Park
|
|
| 16 |
Computer-aided design and manufacturing-based full mouth rehabilitation for a patient with excessive attrition and restricted vertical dimension: A case report
Jun-Ho Cho, Hyung-In Yoon, In-Sung Yeo, Jung-Suk Han
|
|
| 17 |
Comparative evaluation of marginal and internal fit of metal copings fabricated by various CAD/CAM methods
Seung-Jin Jeong, Hye-Won Cho, Ji-Hye Jung, Jeong-Mi Kim, Yu-Lee Kim
|
|
| 18 |
Implant treatment on anterior cross-bite of a patient who had orthognathic surgery 20 years ago
Kwang Man Park, Richard Leesungbok, Suk Won Lee
|
|
| 19 |
Full mouth rehabilitation of patient with severe dental caries with implant fixed prosthesis fabricated with milling and 3D printing method: A case report
Taeyoon Kim, Jun-Suk Lee, Seoung-Jin Hong, Hyeong-Seob Kim, Kung-Rock Kwon
|
|
| 20 |
Fabrication of complete dentures by conventional method and CAD/CAM milling: A case report
Youngchul Jung, Junsuk Lee, Seoung-Jin Hong, Kwantae Noh, Hyeong-Seob Kim, Ahran Pae
|
|
