|
| 1 |
Three-dimensional printing of temporary crowns with polylactic acid polymer using the fused deposition modeling technique: a case series
Eun-Kyong Kim, Eun Young Park, Sohee Kang
|
|
| 2 |
Efficacy of 3D-printed simulation models of unruptured intracranial aneurysms in patient education and surgical simulation
Seung-Bin Woo, Chang-Young Lee, Chang-Hyun Kim, Min-Yong Kwon, Young San Ko, Jong-Ha Lee, Jin-Chul Heo, Sae Min Kwon
|
|
| 3 |
Application of Three Dimensional-Printed Polycaprolactone Nasal Mesh With the Figure of 8 Anchoring Suture Technique for Correction of Caudal Septal Subluxation
Seok-Youl Choi, Jee Won Moon, Su-Jong Kim, Jae-Min Shin, Il-Ho Park
|
|
| 4 |
Three-Dimensional Printing Assisted Preoperative Surgical Planning for Cerebral Arteriovenous Malformation
Inan Uzunoglu, Ceren Kızmazoglu, Resit Buğra Husemoglu, Gokhan Gurkan, Cansu Uzunoglu, Murat Atar, Volkan Cakır, Hasan Emre Aydın, Murat Sayın, Nurullah Yuceer
|
|
| 5 |
Pre-contoured reconstruction plate fabricated via three-dimensional printed bending support
In-Seok Song, Jae-Jun Ryu, Young-Jun Choi, Ui-Lyong Lee
|
|
| 6 |
Prediction of endotracheal tube size using a printed three-dimensional airway model in pediatric patients with congenital heart disease: a prospective, single-center, single-group study
Seyeon Park, Jisoo Ahn, Sung Uk Yoon, Ki Seok Choo, Hye-Jin Kim, Minwoo Chung, Hee Young Kim
|
|
| 7 |
Late reconstruction of extensive orbital floor fracture with a patient-specific implant in a bombing victim
Maximiliaan Smeets, Robin Snel, Yi Sun, Titiaan Dormaar, Constantinus Politis
|
|
| 8 |
Maxillary protraction using customized mini-plates for anchorage in an adolescent girl with skeletal Class III malocclusion
Shuran Liang, Xianju Xie, Fan Wang, Qiao Chang, Hongmei Wang, Yuxing Bai
Korean J Orthod.2020;50(5):346-355. Published online 2020 September 25
DOI: http://dx.doi.org/10.4041/kjod.2020.50.5.346
|
|
| 9 |
A new minimally invasive guided endodontic microsurgery by cone beam computed tomography and 3-dimensional printing technology
Jong-Eun Kim, June-Sung Shim, Yooseok Shin
|
|
| 10 |
The Application of Three-Dimensional Printed Finger Splints for Post Hand Burn Patients: A Case Series Investigation
Ho-Sung Nam, Cheong Hoon Seo, So-Young Joo, Dong Hyun Kim, Dong-Sik Park
|
|
| 11 |
Hand Functions of Myoelectric and 3D-Printed Pressure-Sensored Prosthetics: A Comparative Study
Kyu Ho Lee, Hobeom Bin, KeunBae Kim, So Young Ahn, Bong-Ok Kim, Soo-Kyung Bok
|
|
| 12 |
Three-dimensional printing for craniomaxillofacial regeneration
Laura Gaviria, Joseph J. Pearson, Sergio A. Montelongo, Teja Guda, Joo L. Ong
|
|
| 13 |
Creating protective appliances for preventing dental injury during endotracheal intubation using intraoral scanning and 3D printing: a technical note
Jin-Hyung Cho, Wonse Park, Kyeong-Mee Park, Seo-Yul Kim, Kee-Deog Kim
|
|
| 14 |
Three-dimensional (3D) printing of mouse primary hepatocytes to generate 3D hepatic structure
Yohan Kim, Kyojin Kang, Jaemin Jeong, Seung Sam Paik, Ji Sook Kim, Su A Park, Wan Doo Kim, Jisun Park, Dongho Choi
|
|
| 15 |
Accuracy of three-dimensional printing for manufacturing replica teeth
Keun-Young Lee, Jin-Woo Cho, Na-Young Chang, Jong-Moon Chae, Kyung-Hwa Kang, Sang-Cheol Kim, Jin-Hyoung Cho
Korean J Orthod.2015;45(5):217-225. Published online 2015 September 23
DOI: http://dx.doi.org/10.4041/kjod.2015.45.5.217
|
|
