Journal List > Arch Hand Microsurg > v.24(1) > 1117302

Jung, Park, Shon, Kang, Cha, and Go: Stress Fracture of Olecranon after Plate Fixation for Osteoporotic Monteggia Fracture with Absence of Radial Head: A Case Report

Abstract

When treating a Monteggia fracture, it would be ideal to achieve reduction of dislocation while preserving the radial head. But if preservation of radial head is impossible, radial head replacement may be performed after removing the head. However, in patients who require head resection because it was impossible to replace the radial head, the load applied on the elbow is concentrated on the ulnohumeral joint. If a metal plate is used in this area to fix an ulnar shaft fracture, the proximal screw may act as a stress riser to make the area vulnerable to a fracture. We experienced cases of stress fracture in the olecranon of along the screw insertion due to the proximal screw acting as a stress riser, used in open reduction and metal plate fixation for ulnar shaft fractures in osteoporotic patients with Monteggia fracture who had the radial head removed or had nonunion after previous radial neck fracture.

Figures and Tables

Fig. 1

Ulnar corrective osteotomy and radial head excision were perfomed for the Bado type II chronic Monteggia fracture with the posterior aspect of the ulna.

ahm-24-50-g001
Fig. 2

One year after the operation, complete union of the ulnar fracture and correct alignment of the elbow were confirmed.

ahm-24-50-g002
Fig. 3

Six years after the surgery, a fracture of the olecranon was observed, starting from the proximal screw of the compression plate used for the ulnar fracture.

ahm-24-50-g003
Fig. 4

For stress fractures of the olecranon, a long locking compression plate was added and fixed to the end of the olecranon.

ahm-24-50-g004
Fig. 5

Open reduction and internal plate fixation were performed for a Bado type I chronic Monteggia fracture with nonunion of radial neck, and dislocation of radial head was reduced.

ahm-24-50-g005
Fig. 6

After 8 weeks of operation, a fracture of the olecranon, starting from the proximal screw of the locking plate used for ulnar fracture, is observed.

ahm-24-50-g006
Fig. 7

For the stress fracture of the olecranon, the previous plate was removed and the long locking plate was fixed to the end of olecranon.

ahm-24-50-g007

Notes

CONFLICTS OF INTEREST The authors have nothing to disclose.

References

1. Reckling FW, Cordell LD. Unstable fracture-dislocations of the forearm. The Monteggia and Galeazzi lesions. Arch Surg. 1968; 96:999–1007.
pmid
2. Jepegnanam TS. Salvage of the radial head in chronic adult Monteggia fractures. Report of four cases. J Bone Joint Surg Br. 2006; 88:645–648.
pmid
3. Shon HC, Kim WY, Park SE, Kim YY, Yoon JS, Ji JH. Surgical treatment of neglected adult Monteggia fracture: 2 cases report. J Korean Shoulder Elb Soc. 2006; 9:235–241.
4. Morrey BF. The elbow and its disorders. 3rd ed. Philadelphia: W.B. Saunders;2000.
5. Morrey BF, Askew LJ, Chao EY. A biomechanical study of normal functional elbow motion. J Bone Joint Surg Am. 1981; 63:872–877.
crossref pmid
6. Morrey BF, Tanaka S, An KN. Valgus stability of the elbow. A definition of primary and secondary constraints. Clin Orthop Relat Res. 1991; 187–195.
7. Evans NA, Pemberton DJ. Radial stress fracture adjacent to a metal plate following weight training. Injury. 1998; 29:79–80.
crossref pmid
8. Nagoshi N, Yamanaka K, Sasaki T. Radial shaft stress fracture after internal fixation using a titanium plate. BMJ Case Rep. 2015; 2015:bcr2015209846.
crossref
TOOLS
Similar articles