Causes of failed implant attachments and application of double crown implant overdenture in one patient

Jae-Uk Kwon; Jin-Hyun Cho

doi:10.4047/jkap.2018.56.4.368

Journal List > J Korean Acad Prosthodont > v.56(4) > 1106332

Go to TopGo to Top Go to BottomGo to Bottom

TOOLS

Kwon and Cho: Causes of failed implant attachments and application of double crown implant overdenture in one patient

Case Report

J Korean Acad Prosthodont 2018;56(4):368-374.

Published online: NaN October 2018

DOI: https://doi.org/10.4047/jkap.2018.56.4.368

Causes of failed implant attachments and application of double crown implant overdenture in one patient

Jae-Uk Kwon, Jin-Hyun Cho^∗

Department of Prosthodontics, School of Dentistry, Kyungpook National University, Daegu, Republic of Korea

∗Corresponding Author: Jin-Hyun Cho Department of Prosthodontics, School of Dentistry, Kyungpook National University 2177, Dalgubeol-daero, Jung-gu, Daegu 41940, Republic of Korea +82 (0)53 600 7651: e-mail, prosth95@knu.ac.kr

Received 18 July 201828 August 2018 Accepted 6 September 2018

This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0/) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

In this case, the patient was restored with gold Hader bar mandibular implant overdenture using two implants about 10 years ago, and the retentive force was lost due to severe wear of the bar due to 3.5 years use. The overdenture was repaired using a Locator attachment, but the male part was completely worn after 6.5 years use. Finally, we used a hybrid telescopic double crown with a friction pin to fabricate a new implant overdenture, which was observed for 2 years and showed excellent prognosis. So, we describe the cause of failure of each attachment (Gold Hader bar, Locator) in two implant overdentures and report on the advantages and disadvantages of double crown implant overdenture and the conditions for success. (J Korean Acad Prosthodont 2018;56:368-74)

Keywords: Implant, Attachment, Overdenture, Double crown, Telescopic crown

REFERENCES

1.Doundoulakis JH., Eckert SE., Lindquist CC., Jeffcoat MK. The implant-supported overdenture as an alternative to the complete mandibular denture. J Am Dent Assoc. 2003. 134:1455–8.

2.Davis DM., Packer ME. Mandibular overdentures stabilized by Astra Tech implants with either ball attachments or magnets: 5-year results. Int J Prosthodont. 1999. 12:222–9.

3.Raghoebar GM., Meijer HJ., Stegenga B., van't Hof MA., van Oort RP., Vissink A. Effectiveness of three treatment modalities for the edentulous mandible. A five-year randomized clinical trial. Clin Oral Implants Res. 2000. 11:195–201.

4.Feine JS., Carlsson GE., Awad MA., Chehade A., Duncan WJ., Gizani S., Head T., Lund JP., MacEntee M., Mericske-Stern R., Mojon P., Morais J., Naert I., Payne AG., Penrod J., Stoker GT Jr., Tawse-Smith A., Taylor TD., Thomason JM., Thomson WM., Wismeijer D. The McGill Consensus Statement on Overdentures. Montreal, Quebec, Canada. May 24-25, 2002. Int J Prosthodont. 2002. 15:413–4.

5.Krennmair G., Sütö D., Seemann R., Piehslinger E. Removable four implant-supported mandibular overdentures rigidly retained with telescopic crowns or milled bars: a 3-year prospective study. Clin Oral Implants Res. 2012. 23:481–8.

6.Alsabeeha NH., Payne AG., Swain MV. Attachment systems for mandibular two-implant overdentures: a review of in vitro investigations on retention and wear features. Int J Prosthodont. 2009. 22:429–40.

7.Bansal S., Aras MA., Chitre V. Guidelines for treatment planning of mandibular implant overdenture. J Dent Implant. 2014. 4:86–90.

8.Yu JH., Shin SY. Implant supported overdenture using Locator ^® system on mandibular edentulous patient. J Dent Rehab Appl Sci. 2012. 4:397–406.

9.Lee BK., Park SH., Lee CH., Cho JH. Implant overdenture impressions using a dynamic impression concept. J Adv Prosthodont. 2014. 6:66–9.

10.Weber H., Frank G. Spark erosion procedure: a method for extensive combined fixed and removable prosthodontic care. J Prosthet Dent. 1993. 69:222–7.

11.Phillips K., Wong KM. Space requirements for implant-retained bar-and-clip overdentures. Compend Contin Educ Dent. 2001. 22:516–8. 520, 522.

12.Taylor TD. Indications and treatment planning for mandibular implant overdentures. Feine JS, Carlsson GE, editors. Implant overdentures as the standard of care for edentulous patients. Chicago: Quintessence;2003. p. 71–81.

13.Hong HR., Pae A., Kim Y., Paek J., Kim HS., Kwon KR. Effect of implant position, angulation, and attachment height on peri-implant bone stress associated with mandibular two-implant overdentures: a finite element analysis. Int J Oral Maxillofac Implants. 2012. 27:e69–76.

14.Carr AB., Brown DT. McCracken's removable partial prosthodontics. In: Chapter 10. Principles of removable partial denture design. 12th ed.CV Mosby;2010. p. 115–29.

15.Breitman JB., Nakamura S., Freedman AL., Yalisove IL. Telescopic retainers: an old or new solution? A second chance to have normal dental function. J Prosthodont. 2012. 21:79–83.

16.Hoffmann O., Beaumont C., Tatakis DN., Zafiropoulos GG. Telescopic crowns as attachments for implant supported restorations: a case series. J Oral Implantol. 2006. 32:291–9.

17.Mengel R., Lehmann KM., Metke W., Wolf J., Flores-de-Jacoby L. A telescopic crown concept for the restoration of partially edentulous patients with aggressive generalized periodontitis: two case reports. Int J Periodontic Restor Dent. 2002. 22:129–37.

18.Eitner S., Schlegel A., Emeka N., Holst S., Will J., Hamel J. Comparing bar and double-crown attachments in implant-retained prosthetic reconstruction: a follow-up investigation. Clin Oral Implants Res. 2008. 19:530–7.

19.Naert I., Gizani S., Vuylsteke M., Van Steenberghe D. A 5-year prospective randomized clinical trial on the influence of splinted and unsplinted oral implants retaining a mandibular overdenture: prosthetic aspects and patient satisfaction. J Oral Rehabil. 1999. 26:195–202.

Fig. 1.

Panoramic radiograph after implant placement.

Fig. 2.

Maxillary metal ceramic crowns and denture teeth set-up on edentulous area (A) Maxillary occlusal view; surveyed metal ceramic crown, (B) Frontal view, (C) Mandibular occlusal view; denture teeth set-up for determining attachment.

Fig. 3.

Mandibular implant overdenture using gold Hader bar attachment. (A) Gold Hader bar attachment at initial placement, (B) Fabricated mandibular implant overdenture, (C) Frontal view; decreased vertical dimension by worn denture teeth after 3.5 years.

Fig. 4.

Tissue surface of mandibular overdenture (A) At delivery (B) 3.5 years later; shortened denture border. As the distance of the two implants are same in both pictures, it is shown that the denture border in (B) is significantly shorter than the denture in (A).

Fig 5.

Locator attachment wear and result. (A) Worn male part of Locator attachment after 4 years, (B) After 7.5 years Locator use, (C) Frontal view after 7.5 years Locator use.

Fig. 6.

Mandibular provisional overdenture. (A) Healing abutment on implants, (B) Partially adapted tissue conditioner for retention, (C) Frontal view.

Fig. 7.

Mandibular implant overdenture using double crown attachment. (A) Inner crown on implant, (B) Tissue surface of implant overdenture, (C) Frontal view of implant overdenture.

Fig. 8.

Final panoramic radiograph.

TOOLS

Similar articles