Abstract
Purpose
The purpose of this study is to analyze the relationship between significant femoral neck shortening (SFNS) and bone density after three parallel screw fixation in valgus impacted femoral neck fracture, and to analyze the risk factors for SFNS.
Materials and Methods
This is retrospective study of 83 patients. We performed univariate analysis for patient information, bone density, fracture configuration and screw position divided into SFNS group (n=13) and non-SFNS group (n=70) and performed multivariate analysis using logistic regression model. We also analyzed the relationship between SFNS and complications such as osteonecrosis of femoral head and nonunion.
Results
There was a significant difference in age, screw non-parallelism and bone mineral density of intertrochanteric and total hip area in the univariate analysis between the two groups (P<0.05). In multivariate analysis, old age (odds ratio [OR], 1.10; 95% confidence interval [CI], 1.03-1.21) and screw non-parallelism (OR, 2.95; 95% CI, 1.44-6.59) were significant risk factors for SFNS. The incidence of SFNS was significantly higher in the complication group (P=0.027).
Conclusion
Bone density did not significantly affect SFNS in valgus impacted femoral neck fractures treated with three parallel screws. The risk factors of SFNS were old age and screw non-parallelism. Therefore, we recommend using other fixation method to prevent SFNS in older ages and making the screw position as parallel as possible when performing screw fixation in valgus impacted femoral neck fracture.
Femoral neck fracture is an increasing trend, accounting for about half of all hip fractures1). Impacted femoral neck fracture is a fracture with a close apposition of the fracture fragment. Its frequency is known to be 15% to 20% of the femoral neck fracture2). Impacted femoral neck fractures rarely form varus impaction3), but usually have the form of valgus impaction. In the case of valgus impacted femoral neck fracture, non-surgical treatment was performed in the past2), but now it is treated with multiple parallel screw fixation without reducing the fracture site45).
Parallel screw fixation in a femoral neck fracture is to promote fracture healing by compression of the fracture site67). But this leads to a reduction in the abductor moment arm and shortening of the muscle8), resulting in functional problems67) and is associated with postoperative complications 910). Most orthopedic surgeons think that femoral neck shortening is common and cause functional problems7) and the frequency of significant femoral neck shortening (SFNS) in screw fixation in femoral neck fractures is known to be about 30%6).
Despite the fact that SFNS is associated with clinically unfavorable outcomes, there are only two studies suggesting a risk factor for neck shortening in femoral neck fractures411). In these studies, low bone density, old age, displaced fracture and poor reduction quality are commonly used as risk factors. Among these factors, low bone density and old age are associated with neck shortening in valgus impacted femoral neck. Chen et al.11) presents the T-score of –2.5 or less is the most relevant factor, and Liu et al.4) suggests low Singh index as one of the risk factors. However, these two studies can be pointed out as a limitation because they did not specify the method of measuring femoral neck shortening11), used various fixation methods11), or used Singh index4), which is known to be less correlated with bone density12).
In this study, unlike previous studies, the method of measurement of femoral neck shortening was clarified, only cases using only one fixation method were analyzed, and only cases measuring bone density using the dual energy X-ray absorptiometry (DXA) were analyzed.
This study hypothesized that the lower bone density, the more SFNS will occur in valgus impacted femoral neck fractures and the purpose of this study is to identify risk factors that cause SFNS.
We retrospectively reviewed 83 patients who met exclusion criteria among 530 patients operated femoral neck fractures by one senior surgeon (YBS) in Inje University Sanggye Paik Hospital from January 2009 to February 2016 (Fig. 1). The study was approved by Sanggye Paik Hospital's institutional review board (No. 2017-08-009).
All patients maintained bed rest until the operation and underwent 1 pound skin traction. Surgery was performed under general anesthesia or regional anesthesia and the patient was placed in the supine position on the fracture table and anteroposterior (AP) and lateral radiographs were obtained using image intensifier. After applying 2-5 cm skin incision, three screws were inserted in parallel with the inverted triangular configuration using guide pins as close as possible to the cortex of femoral neck. Screws were used for 6.5 mm, titanium alloy, partial cancellous threaded, cannulated screw (Stryker, Kalamazoo, MI, USA) and the threads of the screws were positioned past the fracture site. We did not use washer for screw insertion.
Immediately after surgery, knee and hip passive range of motion were performed. Patients began partial weight bearing of the affected side using a walker immediately after surgery until 6 weeks and full weight bearing was allowed in the tolerable range after 6 weeks. We performed standard AP and lateral radiographs of hip at 2 weeks, 6 weeks, 3 months, and 6 months postoperatively, and from 6 months after surgery, we performed the radiographs every 6 months.
We investigated the age, sex, fractured side and body mass index (kg/m2). The time taken from injury to operation was examined and divided into two groups based on 24 hours. The degree of preoperative walking ability was divided into 1) independent ambulation, 2) cane ambulation, 3) walker assistant ambulation, 4) wheel chair ambulation, and 5) bed ridden state. The preoperative physical status was divided into 4 groups according to the American Society of Anesthesiologists (ASA) grade. This was confirmed by an anesthesiologist's preoperative evaluation chart. We examined the use of drugs that affect bone turn over for more than 3 months before surgery such as bisphosphonate, selective estrogen receptor modulator and teriparatide.
The valgus impacted femoral neck fracture was defined as the following. 1) In the AP radiograph, the fragment should be closed apposition and impaction at the medial or lateral side of the fracture site. 2) The angle of the medial group of trabeculae at the fracture site should be valgus configuration. 3) In the lateral radiograph, the angle between the mid line of the neck and the radius line of the head should be less than 15°. Modified Pauwels angle13) were measured and divided into three groups: less than 30°, 30 to 50°, and 50°.
To measure the degree of neck shortening, we measured articular-trochanteric distance (ATD), the distance from the proximal point to the superior margin of the femoral head at the proximal point of the greater trochanter of the fractured side and the unfractured side, on AP radiographs immediately after surgery9). To standardize the ATD on the fractured side, the ATD index was obtained by dividing it by the ATD on the unfractured side10) (Fig. 2). In the same way, ATD index was measured at 6 weeks, 3 months, and 6 months, respectively, and the reduction rate was calculated based on the ATD index immediately after surgery. We defined the SFNS group as a reduction rate of 30% or more and the non-SFNS group as a reduction rate of less than 30% based on the 6-month ATD index. When reoperation was performed with complication before 6 months, neck shortening was judged using ATD index just before reoperation. A radiographic measurement was performed without knowing the patient's clinical information to reduce bias.
Screw non-parallelism, screw-tip distance, and spread of screws were measured on plain radiographs immediately after surgery. Screw non-parallelism was determined to be the largest angle between the longitudinal axes of the three screws in AP and lateral radiographs14). The screw-tip distance was measured as the sum of the distance between the three screw tips and the cortex of the femoral head in the AP radiographs14). The spread of screws was measured by calibrating the distance between the two most peripherally placed screws of the three screws on the AP and lateral radiographs to the head diameter15).
As a surrogate of bone density, bone mineral density (BMD, g/cm2) was determined by measuring the bone mineral contents (g) and area (cm2) of the contralateral proximal femur using DXA. The region of interest (ROI) is divided into neck, greater trochanter, intertrochanteric area and total hip to actually measure the area through which the three parallel screws pass, and total hip is defined as the combined area of neck, greater trochanter, and intertrochanteric area (Fig. 3). BMD results were included only within 3 months after surgery (mean, 14.7 days; 1 to 89 days). DXA was used with GE Lunar Prodigy (GE Healthcare, Madison, WI, USA) and calibration was performed daily through density phantom for quality control.
Complication was defined as the occurrence of osteonecrosis of femoral head (ONFH) and nonunion. ONFH was defined as the presence of a cystic and sclerotic change, a visible crescent sign, or flattening or collapse of the femoral head in plain radiographs, and as a single density line delineating a necrotic-viable bone interface at the femoral head in a T1-weighted image or a double density line created by a hypervascular grannulation tissue at a necrotic-viable bone interface in a T2-weighted image in magnetic resonance imaging16). Nonunion was defined as the patient's pain persisted with a fracture line up to 6 months postoperatively17).
We performed a univariate analysis between the SFNS group and the non-SFNS group. For continuous variables, Kolmogorov-Smirnov test and Shapiro-Wilk test for normality test. Independent sample t-test was performed if normal distribution was assumed, and Mann-Whitney test was used if not. For the categorical variables, the chi-square test was performed. But if more than 20% of the cells with an expected frequency of less than 5, Fisher's exact test was performed. To adjust variables related to the occurrence of SFNS, multivariate analysis was performed by logistic regression model for variables with a P-value less than 0.05 in univariate analysis. Three orthopedic surgeons (EYJ, KIK, SYK) independently measured the radiographic measurements such as modified Pauwels angle, screw non-parallelism, screw-tip distance, spread of screws on AP and lateral radiographs and reduction rate of ATD index at 6 months. The interclass coefficient (ICC) was measured as 0.93, 0.86, 0.91, 0.83, 0.89, and 0.88, respectively. This means that there is reliability between the radiographic measurements according to Landis and Koch18). All statistical assessments are two-tailed and are evaluated at the 0.05 level of signiflcance. Statistical analyses were performed with use of PASW Stitistics ver. 18.0 software (IBM Co., Armonk, NY, USA).
The mean age of the patients was 69.1 years (range, 28-94 years) and the mean follow-up period was 29.1 months (range, 12-98 months). Of the 83 patients who underwent three parallels screw fixation in a valgus impacted femoral neck fracture, 13 patients (15.7%) had SFNS.
Among the patient information between the SFNS group and the non-SFNS group, only the age was significantly different between the two groups (P=0.002) (Table 1). The average age of SFNS group was 76.85±7.67 years and that of non-SFNS group was 67.70±14.12 years. In radiologic parameters, BMD of intertrochanter, BMD of total hip, and screw non-parallelism were significantly different between the two groups (P<0.05) (Table 2).
In multivariate analysis using logistic regression model, age and screw non-parallelism were less than 0.05 P-value and adopted as a risk factor for SFNS (Table 3). The adjusted odds ratio (OR) for SFNS for age was 1.10 (95% confidence interval [CI], 1.03-1.21) and the estimated OR for SFNS for screw non-parallelism was 2.95 (95% CI, 1.44-6.59) (Fig. 4).
Of the 13 SFNS patients, 4 patients (30.8%) at the 6th week, 4 patients (30.8%) at the 3rd month, and 5 patients (38.5%) at the 6th month were diagnosed with SFNS. Five patients (38.5%) had ONFH or nonunion (Table 4). Complications occurred in 13 of 83 patients. There were 11 ONFH patients and 4 nonunion patients. SFNS occurred in 5 patients (38.5%) in the complication group and in 8 patients (11.4%) in the non-complication group. There was a significant difference between the two groups (P=0.027) (Table 5).
In a retrospective study of 83 patients, old age and screw non-parallelism were risk factors for SFNS in three parallel screw fixation in valgus impacted femoral neck fracture. Bone density between the SFNS and non-SFNS groups significantly differed in the intertrochanteric area and the total hip area, but it was not a risk factor for SFNS.
This study can provide sufficient reliable support for the opinion that low bone density is not associated with femoral neck shortening in valgus impacted femoral neck fracture for the following reasons: 1) we analyzed BMD itself using DXA as a surrogate of bone density, unlike previous studies. 2) Unlike previous studies that included displaced fractures in the study of femoral neck shortening, this study, in which only valgus impacted femoral neck fractures were studied, could be more clear about bone density and screw fixation. As a basis for the first reason, in a systemic review of the relationship between fracture fixation and osteoporosis, Goldhahn et al.19) found that in most in-vitro studies, low bone density was associated with fixation failure, whereas clinical studies have shown inconsistent results. In this review, the reasons for this result were that most clinical studies have used Singh index, which is less related to bone density than BMD using DXA and BMD of other parts other than fracture site using DXA. Therefore, the authors recommended the use of site-specific BMD using DXA to measure local bone density, as suggested by Eckstein et al20). But in most previous studies of femoral neck shortening, bone density was measured using Singh index or T-score not using BMD itself and the resultare different from each other491011). As a basis for the second reason, Viberg et al.21) noted that the OR of low BMD for fixation failure was higher, although not significantly, in the nondisplaced femoral neck fracture than in the displaced femoral neck fracture. This study explained that in the case of nondisplaced fractures, the main reason for fixation failure was probably low BMD because of the relatively good blood supply and bone contact. Therefore, the results of our study, which excluded displaced femoral fractures, may be more reliable to explain the relationship between bone density and femoral neck shortening than in previous studies.
In this study, age was presented as a risk factor for SFNS in a valgus impacted femoral neck fracture treated with three parallel screw fixation. This is consistent with previous studies on the risk factors of femoral neck shortening411). Conn and Parker22) reported a significant increase in age in the nonunion group in a study of internal fixation in a nondisplaced femoral neck fracture. This study explains that as the age increases, the bone becomes weaker and the blood supply to the femoral head becomes more unstable. Because of the higher failure rate at older ages than at younger ages in internal fixation of nondisplaced femoral neck fracture, some studies suggest that primary arthroplasty should be considered in older ages23). However, primary arthroplasty has not been accepted as a common treatment method for nondisplaced femoral neck fractures due to disadvantage such as deep infection, periprosthetic fracture, dislocation, loosening, and acetabular wear22). Recently, a length-stable implant has emerged as a method to solve femoral neck shortening without having disadvantages of primary arthroplasty. Multiple full threaded screws, sliding hip screw with two fully threaded screws and dynamic locking plate (Targon® femoral neck; B. Braun, Sheffield, UK) are currently reporting clinical results in femoral neck fracture2425).
In this study, the relationship between SFNS and screw position was different from previous studies. First, screw non-parallelism among screw positions was a risk factor for SFNS in valgus impacted femoral neck fractures treated with three parallel screw fixation. On the other hand, in previous studies, the degree of screw parallelism when screw fixation in femoral neck fractures was not related to nonunion1415). However, previous studies cannot be compared with the results of this study because of the different measurement criteria of screw parallelism15) and no analysis of the screw version. Papanastassiou et al.26) reported that divergent screw fixation showed better clinical results compared to parallel screw fixation in a femoral neck fracture. Gümüştaş27) reported that the fixation of the oblique screws added to the parallel screw fixation showed better results in the biomechanical study. Therefore, we concluded that even with the same amount of non-parallelism, the clinical outcome may vary depending on the version of the screw, and it is necessary to analyze the effect of screw version on SFNS by subdividing screw non-parallelism. Second, in most studies, screw-tip distance and spread of screws are considered to be important factors in clinical outcomes51415). However, in our study, screw-tip distance and spread of screws were not related to SFNS. One of the reasons for this result is that the screw-tip distance and spread of screws were much smaller in both two groups of this study than in successful group of the previous studies1415). This means that both groups of this study had better purchase of the screw to femoral head and neck than the successful group of previous studies.
In this study, 5 of 13 SFNS patients underwent neck shortening until 6 months postoperatively (Table 4). Stockton et al.28) emphasized that measuring shortening only shortly after surgery could underestimate the actual amount of shortening. Chen et al.11) reported that most shortening occurred between 4 weeks and 3 months. However, based on the results of this study, we suggest that shortening should be evaluated for at least 6 months, since shortening may progress to 6 months. In addition, as in this study, 44% (4/9) of patients with progressing neck shortening after 3 months are associated with nonunion or ONFH (Table 4). In some of the previous studies, the criteria for nonunion in femoral neck fractures included neck shortening or absorption of femoral neck at 3 months or later2930). This suggests that there is a close relationship between neck shortening and nonunion in femoral neck fracture. In our study, SFNS occurred in all 4 nonunion patients. Therefore, we recommend that patients undergoing neck shortening for up to 3 months be sure to investigate complications, especially nonunion.
The limitations of this study are as follows. First, there is a selection bias because it is a retrospective design. In order to reduce the selection bias as much as possible, this study measured all radiographic measurements without any clinical outcome. Second, the number of patients analyzed is small. The third is that the bone density of the fractured side could not be measured before surgery. However, to reflect the preoperative status of the fractured side as much as possible, this study used only BMD data within 3 months postoperatively and only BMD data of the contralateral proximal femur.
We commonly observe SFNS when parallel screw fixation is performed on valgus impacted femoral neck fractures. To investigate the relationship between low bone density and SFNS, unlike previous studies, our study used BMD value itself using DXA. As a result, low bone density was not associated with SFNS. In addition, we tried to investigate the risk factors of SFNS, and old age and screw non-parallelism were analyzed as risk factors of SFNS. Therefore, we recommend the use of other fixation method such as length-stable implants to prevent SFNS in older ages and making the screw position as parallel as possible when performing three screw fixation in valgus impacted femoral neck fracture. In future studies, it is necessary to analyze the effect of screw version on SFNS by subdividing screw non-parallelism.
References
2. Raaymakers EL. The non-operative treatment of impacted femoral neck fractures. Injury. 2002; 33:Suppl 3. C8–C14.
4. Liu Y, Ai ZS, Shao J, Yang T. Femoral neck shortening after internal fixation. Acta Orthop Traumatol Turc. 2013; 47:400–404.
5. Selvan VT, Oakley MJ, Rangan A, Al-Lami MK. Optimum configuration of cannulated hip screws for the fixation of intracapsular hip fractures: a biomechanical study. Injury. 2004; 35:136–141.
6. Zlowodzki M, Ayeni O, Petrisor BA, Bhandari M. Femoral neck shortening after fracture fixation with multiple cancellous screws: incidence and effect on function. J Trauma. 2008; 64:163–169.
7. Zlowodzki M, Brink O, Switzer J, et al. The effect of shortening and varus collapse of the femoral neck on function after fixation of intracapsular fracture of the hip: a multi-centre cohort study. J Bone Joint Surg Br. 2008; 90:1487–1494.
8. Noda M, Saegusa Y, Takahashi M, et al. Diminished abductor muscular strength in patients with valgus-impacted femoral neck fractures treated by internal fixation: Clinical study and biomechanical considerations. J Orthop Surg (Hong Kong). 2017; 25:2309499017716070.
9. Shimizu T, Miyamoto K, Masuda K, et al. The clinical significance of impaction at the femoral neck fracture site in the elderly. Arch Orthop Trauma Surg. 2007; 127:515–521.
10. Yoon PW, Shin YH, Yoo JJ, Yoon KS, Kim HJ. Progression of a fracture site impaction as a prognostic indicator of impacted femoral neck fracture treated with multiple pinning. Clin Orthop Surg. 2012; 4:66–71.
11. Chen X, Zhang J, Wang X, Ren J, Liu Z. Incidence of and factors influencing femoral neck shortening in elderly patients after fracture fixation with multiple cancellous Screws. Med Sci Monit. 2017; 23:1456–1463.
12. Klatte TO, Vettorazzi E, Beckmann J, Pueschel K, Amling M, Gebauer M. The Singh Index does not correlate with bone mineral density (BMD) measured with dual energy X-ray absorptiometry (DXA) or peripheral quantitative computed tomography (pQCT). Arch Orthop Trauma Surg. 2015; 135:645–650.
13. Wang SH, Yang JJ, Shen HC, Lin LC, Lee MS, Pan RY. Using a modified Pauwels method to predict the outcome of femoral neck fracture in relatively young patients. Injury. 2015; 46:1969–1974.
14. Yang JJ, Lin LC, Chao KH, et al. Risk factors for nonunion in patients with intracapsular femoral neck fractures treated with three cannulated screws placed in either a triangle or an inverted triangle configuration. J Bone Joint Surg Am. 2013; 95:61–69.
15. Gurusamy K, Parker MJ, Rowlands TK. The complications of displaced intracapsular fractures of the hip: the effect of screw positioning and angulation on fracture healing. J Bone Joint Surg Br. 2005; 87:632–634.
16. Zalavras CG, Lieberman JR. Osteonecrosis of the femoral head: evaluation and treatment. J Am Acad Orthop Surg. 2014; 22:455–464.
17. Nikolopoulos KE, Papadakis SA, Kateros KT, et al. Longterm outcome of patients with avascular necrosis, after internal fixation of femoral neck fractures. Injury. 2003; 34:525–528.
18. Landis JR, Koch GG. The measurement of observer agreement for categorical data. Biometrics. 1977; 33:159–174.
19. Goldhahn J, Suhm N, Goldhahn S, Blauth M, Hanson B. Influence of osteoporosis on fracture fixation--a systematic literature review. Osteoporos Int. 2008; 19:761–772.
20. Eckstein F, Lochmüller EM, Lill CA, et al. Bone strength at clinically relevant sites displays substantial heterogeneity and is best predicted from site-specific bone densitometry. J Bone Miner Res. 2002; 17:162–171.
21. Viberg B, Ryg J, Overgaard S, Lauritsen J, Ovesen O. Low bone mineral density is not related to failure in femoral neck fracture patients treated with internal fixation. Acta Orthop. 2014; 85:60–65.
22. Conn KS, Parker MJ. Undisplaced intracapsular hip fractures: results of internal fixation in 375 patients. Clin Orthop Relat Res. 2004; (421):249–254.
23. Sikand M, Wenn R, Moran CG. Mortality following surgery for undisplaced intracapsular hip fractures. Injury. 2004; 35:1015–1019.
24. Boraiah S, Paul O, Hammoud S, Gardner MJ, Helfet DL, Lorich DG. Predictable healing of femoral neck fractures treated with intraoperative compression and length-stable implants. J Trauma. 2010; 69:142–147.
25. Takigawa N, Yasui K, Eshiro H, et al. Clinical results of surgical treatment for femoral neck fractures with the Targon® FN. Injury. 2016; 47:Suppl 7. S44–S48.
26. Papanastassiou ID, Mavrogenis AF, Kokkalis ZT, Nikolopoulos K, Skourtas K, Papagelopoulos PJ. Fixation of femoral neck fractures using divergent versus parallel cannulated screws. J Long Term Eff Med Implants. 2011; 21:63–69.
27. Gümüştaş SA, Tosun HB, Ağlri , Orak MM, Onay T, Okçu G. Influence of number and orientation of screws on stability in the internal fixation of unstable femoral neck fractures. Acta Orthop Traumatol Turc. 2014; 48:673–678.
28. Stockton DJ, Lefaivre KA, Deakin DE, et al. Incidence, magnitude, and predictors of shortening in young femoral neck fractures. J Orthop Trauma. 2015; 29:e293–e298.
29. Saito N, Miyasaka T, Toriumi H. Radiographic factors predicting non-union of displaced intracapsular femoral neck fractures. Arch Orthop Trauma Surg. 1995; 114:183–187.
30. Alho A, Benterud JG, Rønningen H, Høiseth A. Prediction of disturbed healing in femoral neck fracture. Radiographic analysis of 149 cases. Acta Orthop Scand. 1992; 63:639–644.