9 results

177 Accuracy of five implant impression technique: effect of splinting materials and methods
Sang-Jik Lee, Sung-Bum Cho
KMSID: 1054026   J Adv Prosthodont. 2011;3(4):177-185.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.177
         
186 The effect of thermocycling on the bonding of different restorative materials to access opening through porcelain fused to metal restorations
Mohammed M. AL-Moaleem, Farhan Khalid Shah, Nausheen Saied Khan, Amit Porwal
KMSID: 1054027   J Adv Prosthodont. 2011;3(4):186-189.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.186
         
190 A comparative study on the initial stability of different implants placed above the bone level using resonance frequency analysis
In-Ho Kang, Chang-Whe Kim, Young-Jun Lim, Myung-Joo Kim
KMSID: 1054028   J Adv Prosthodont. 2011;3(4):190-195.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.190
         
196 A comparison of marginal fit of glass infiltrated alumina copings fabricated using two different techniques and the effect of firing cycles over them
Hirasankar Bhowmik, Rambhao Parkhedkar
KMSID: 1054029   J Adv Prosthodont. 2011;3(4):196-203.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.196
         
204 A retrospective study on related factors affecting the survival rate of dental implants
Hee-Won Jang, Jeong-Kyung Kang, Ki Lee, Yong-Sang Lee, Pil-Kyoo Park
KMSID: 1054031   J Adv Prosthodont. 2011;3(4):204-215.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.204
         
216 Polymerization behavior and thermal characteristics of two new composites at five temperatures: refrigeration to preheating
Tahereh Sadat Jafarzadeh-Kashi, Marzieh Mirzaii, Mohmmad Erfan, Akbar Fazel, Solmaz Eskandarion, Vahid Rakhshan
KMSID: 1054032   J Adv Prosthodont. 2011;3(4):216-220.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.216
         
221 Influence of surface modification techniques on shear bond strength between different zirconia cores and veneering ceramics
Ramin Mosharraf, Mansour Rismanchian, Omid Savabi, Alireza Hashemi Ashtiani
KMSID: 1054033   J Adv Prosthodont. 2011;3(4):221-228.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.221
         
229 A 5-year retrospective clinical study of the Dentium implants
Jeong-Yol Lee, Hyo-Jin Park, Jong-Eun Kim, Yong-Geun Choi, Young-Soo Kim, Jung-Bo Huh, Sang-Wan Shin
KMSID: 1054034   J Adv Prosthodont. 2011;3(4):229-235.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.229
         
236 Frenectomy for improvement of a problematic conventional maxillary complete denture in an elderly patient: a case report
Youssef S. Al Jabbari
KMSID: 1054035   J Adv Prosthodont. 2011;3(4):236-239.   Published online 2011 December 28    DOI: http://dx.doi.org/10.4047/jap.2011.3.4.236
         
Articles from The Journal of Advanced Prosthodontics are provided here courtesy of The Korean Academy of Prosthodontics