With increasing interest in maintaining a positive body image following breast cancer surgery, reconstruction surgery has become an important topic. To achieve balanced breast symmetry with reconstruction surgery, volume matching of the reconstructed breast to natural breasts is the most important consideration [1]. As such, various methods including Archimedes' method, plastic casting, anthropomorphic measurements, use of a Grossman-Rounder cone, and 3-dimensional (3D) surface imaging techniques have been evaluated for breast volume measurement [23456789].

Another method that has been proposed for preoperative breast volume measurement is mammography [1011121314]. Because mammography is commonly used for breast cancer diagnosis, mammographic measurement is a readily available option for which no additional equipment is needed [710]. In most studies, volume measurement in mammography involved the use of geometric formulae to transform measurements into 3D breast shapes [11121314]. However, the applicability of this method is limited by observer subjectivity and inconsistencies in accuracy [231112131415].

A fully automated volumetric software has been developed for objective evaluation and control of interobserver variability in measuring breast density [16171819]. The software assesses the breast as a 3D structure and automatically quantifies the entire breast and fibroglandular volume and mammographic densities for both breasts [19]. Previous studies involving a fully automated volumetric software have focused on evaluating the reliability of density measurements, comparisons of software-based versus visual assessments, and the usefulness of software as stratification tools in evaluating the risk of breast cancer [161718192021]. However, to the best of our knowledge, no studies have evaluated entire breast volume data estimated using a fully automated volumetric software nor applied software in clinical practice for estimating breast volume.

Thus, this study aimed to explore the feasibility of using mammography with a fully automated breast volumetric software for measuring the preoperative breast volume in patients with breast cancer who undergo reconstruction surgery.

A total of 66 patients were included in this study. The mean age was 63.9 years (range, 45–87 years), and the mean body mass index was 23.92 kg/m² (range, 17.91–31.68 kg/m²). Tumor presentation types of mammography were as follows: calcification only in 14 patients, mass only in 35 patients, and both mass and calcification in 17 patients. Mammographic density patterns were fatty breast (A or B) in 23 patients and dense breast (C or D) in 43 patients. The clinical T stage was 0 in 7 patients, 1 in 30 patients, and 2 in 29 patients. All patients had unilateral breast cancer (right side, 40 patients and left side, 26 patients). The mean specimen weight was 421.22 g (range, 96–830 g). The mean specimen volume calculated from weight and adjusted density, used as a standard reference, was 438.83 cm³ (range, 98.70–879.23 cm³).

Table 1 shows the estimated volume from Quantra and 4 other conventional mammography-based prediction methods. There was a strong correlation between specimen volume and breast volume calculated using Quantra: r = 0.920 for the entire breast group, r = 0.921 in the fatty breast group, and r = 0.915 in the dense breast group. Compared to conventional mammographic methods, Quantra-based estimates had a stronger correlation with the specimen volume of the entire, fatty, and dense breast groups (Table 2). However, both Quantra- and other mammography-based prediction methods tended to overestimate the mastectomy specimen volume.

For the application of Quantra-based estimates in measuring preoperative breast volume, we adjusted a simple equation using linear regression analysis: mastectomy specimen volume = Quantra-based estimate × 0.8. There was also a strong correlation between specimen volume and adjusted Quantra-based estimates: r = 0.920 for the entire breast group, r = 0.921 in the fatty breast group, and r = 0.915 in the dense breast group (Table 2). Bland-Altman scatter plots show that the difference between mastectomy specimen volume and adjusted Quantra-based estimates remained acceptable (mean ± 1.96 SD), indicating high reliability for the prediction of preoperative breast volume. There was no proportional or fixed bias (Fig. 3). An example of how adjusted Quantra-based estimates were applied to the patient is provided in Fig. 4.

This study investigated the feasibility of using breast mammography combined with a fully automated breast volumetric software for measuring preoperative breast volume. Compared to estimates using conventional mammography-based calculations, Quantra-based estimates obtained in this study correlated more strongly with mastectomy specimen volume. However, there was a tendency to overestimate the mastectomy specimen volume, which had to be adjusted for and then applied to measure the preoperative breast volume. To predict breast volume from raw data of Quantra, we used the following formula; adjusted Quantra-based estimates = Quantra-based estimates × 0.8.

In this study, a fully automated beast volumetric software for preoperative measurements tended to overestimate the actual breast volume, which can be explained by the fact that the tissue captured by mammography did not completely match the tissue removed during mastectomy. All breast tissue should be removed in total mastectomy; however, some parts of the skin, subcutaneous fat, and axillae are left for postoperative skin closure and cosmesis. In addition, before the operation, the breast also contains blood, water, and secretions such as milk, that are removed during resection, reducing the overall weight [2324]. Thus, the estimates derived from Quantra should be adjusted so that they can be applied to reconstructive surgery.

Quantra-based estimates better correlated with mastectomy specimen volume than previously described mammography-based calculation estimates. Quantra segments the breast region from the background of mammography and uses volumetric values to derive information about the X-ray attenuation properties of the column of breast tissue above that pixel. Thus, Quantra-based calculations may be more accurate than previously described mammography-based calculation methods that are derived under the assumption that the breast is either a cone or half-elliptical cylinder shape to transform 2-dimensional measurements made from the mammography into 3D shapes [111213141819].

Among the previously described mammography-based calculation methods, the formula of Kalbhen et al. [14] (breast volume = 1/4πH_ccW_ccC_cc) yielded results most closely correlated with breast specimen volumes. With the development of the mammography machine, breast compressions are now performed at a higher pressure, which violates the assumption of the cone shape, creating conditions more suitable for the half-elliptical cylinder shape assumption considered by Kalbhen et al. [214]. Several studies have investigated the most suitable equation for calculating the breast volume by mammography [21112131415], but the results have differed among them mainly due to the differences in the size and density of target breasts by race. The optimal method that yields measurements similar to the actual volume is still controversial.

In reconstructive and aesthetic breast surgery, accurate volume estimation is an important component of preoperative planning for achieving breast symmetry and cosmesis outcome. Most classic methods such as Archimedes' method, plastic casting, and anthropomorphic measurements have been unreliable, difficult to execute, and lacked practicability [237]. Preoperative MRI is known to be a relatively accurate and reproducible method to measure breast volume [2]. MRI is a 3D imaging modality; however, it does not provide precise information regarding breast shape that can occur with conditions, such as ptosis, because MRI requires patients to be examined lying face down. The volumetric software mentioned in previous studies using MRI was reported to be diverse and unstandardized [252627]. Additionally, MRI techniques and associated software require extensive effort because the inspector measures the volume by specifying the area directly for each slice of the image [25]. 3D surface imaging modalities are a recently developed innovative method for estimating breast volume that is easy to use, reliable, fast, and portable [4568]. However, this technique is costly, motion-sensitive, and cannot differentiate the posterior surface of the breast from the chest wall [5].

A fully automated breast volumetric software has a relatively high degree of reproducibility and reliability [1618]. Additionally, if data are extracted directly from a software-equipped mammography machine, the estimates can be obtained automatically without any additional effort required from the patient or treating physician. Nevertheless, this method has some drawbacks. The software is currently available only for digital mammography machines and is expensive [19]. Further, the software does not provide information on breast appearances such as the shape, trunk width, or presence of ptosis.

Unfortunately, this was a small, single-center study. To improve the accuracy of the study, only patients who underwent total mastectomy were included. There are also several problems associated with using the specimen volume as a standard for comparison. We used the volume estimated based on the specimen weight and not the exact measured specimen volume. Additionally, as the specimens were obtained from patients with breast cancer, the specimen volume included the tumor volume. To reduce this difference, cases of T3 and T4 cancer were excluded from this study. However, if the tumor is large, the volume of the breast can be overestimated or underestimated even though it is a T2 tumor.

This study demonstrated the usefulness of Quantra for preoperative volume measurement by comparing it with previously described mammography-based estimates. A previous study showed that mammography-based methods might be more accurate than classic techniques including casting, Archimedes' method, anthropometry, or using the Grossman-Roudner device [3]. Recently developed 3D surface imaging technology and MRI measurement software were not available in our lab; therefore comparisons to this technique were not possible. However, we compared the estimated volume from Quantra with the actual volume from the total mastectomy specimen and obtained meaningful results. This study did not aim to determine whether a fully automated breast volumetric software is the optimal method to predict preoperative breast volume, but rather to investigate whether mammography with a fully automated breast volumetric software could be another feasible method to predict preoperative breast volume.

In conclusion, the estimated breast volume from a fully automated breast volumetric software, although overestimated, was strongly correlated with the actual mastectomy specimen volume. Thus, using a fully automated breast volumetric software with mammography can be helpful for measuring the preoperative breast volume for patients with breast cancer who will undergo reconstruction surgery.