107 results  1 of 6 

1 Esthetic restoration of maxillary anterior fixed prosthesis using a digital diagnostic wax-up: a case report
Eunji Oh, Songyi Park, Woohyung Jang, Chan Park, Kwi-Dug Yun, Hyun-Pil Lim, Sangwon Park
J Dent Rehabil Appl Sci.2023;39(2):89-95.   Published online 2023 June 30     DOI: http://dx.doi.org/10.14368/jdras.2023.39.2.89
      
2 Fabrication of maxillary complete denture and mandibular implant retained overdenture using CAD-CAM system and Monolithic disc: a case report
Jaehyeok Ro, Haemin Bang, Woohyung Jang, Chan Park, Hyun-Pil Lim, Sangwon Park, Kwi-Dug Yun
J Dent Rehabil Appl Sci.2023;39(2):96-103.   Published online 2023 June 30     DOI: http://dx.doi.org/10.14368/jdras.2023.39.2.96
      
3 Fabrication of complete denture using CAD-based vertical dimension increase and monolithic disc: a case report
Hyeon Kim, Woohyung Jang, Chan Park, Kwi-Dug Yun, Hyun-Pil Lim, Sangwon Park
J Dent Rehabil Appl Sci.2022;38(4):242-248.   Published online 2022 December 31     DOI: http://dx.doi.org/10.14368/jdras.2022.38.4.242
      
4 3D printed interim immediate denture by using the occlusal plane digital transfer method of the POP BOW system in a patient planning to extract upper and lower residual teeth: a case report
Do-Hyun Park, Eun-Bin Bae, In-Hwan Jung, Chang-Mo Jeong, Mi-Jung Yun, Jung-Bo Huh, So-Hyoun Lee
J Dent Rehabil Appl Sci.2022;38(3):178-188.   Published online 2022 September 30     DOI: http://dx.doi.org/10.14368/jdras.2022.38.3.178
      
5 Maxillary space closure using a digital manufactured Mesialslider in a single appointment workflow
Lynn Wilhelmy, Jan H Willmann, Nour Eldin Tarraf, Benedict Wilmes, Dieter Drescher
Korean J Orthod.2022;52(3):236-245.   Published online 2022 April 14     DOI: http://dx.doi.org/10.4041/kjod21.203
      
6 Innovative customized CAD/CAM nickel-titanium lingual retainer versus standard stainless-steel lingual retainer: A randomized controlled trial
Emilie Gelin, Laurence Seidel, Annick Bruwier, Adelin Albert, Carole Charavet
Korean J Orthod.2020;50(6):373-382.   Published online 2020 November 25     DOI: http://dx.doi.org/10.4041/kjod.2020.50.6.373
      
7 CAD/CAM 의치상 레진과 열중합 의치상 레진의 두께에 따른 굴곡 강도 비교
Dong-Hyung Lee, Joon-Seok Lee
J Dent Rehabil Appl Sci.2020;36(3):183-195.   Published online 2020 September 30     DOI: http://dx.doi.org/10.14368/jdras.2020.36.3.183
      
8 The treatment of an edentulous patient with conventional complete denture and CAD/CAM complete denture
Sungyoon Cho, Joonseok Lee
J Korean Acad Prosthodont.2020;58(1):42-49.   Published online 2020 January 31     DOI: http://dx.doi.org/10.4047/jkap.2020.58.1.42
      
9 Full mouth rehabilitation of a severely worn dentition using intraoral scanner and the CAD/CAM double scanning technique
Se-Na Yoon, Jung-Suk Han, In-Sung Yeo, Hyung-In Yoon
J Korean Acad Prosthodont.2020;58(1):67-76.   Published online 2020 January 31     DOI: http://dx.doi.org/10.4047/jkap.2020.58.1.67
      
10 치아 삭제의 다른 자가 평가 방법 후 개선에 대한 비교 연구
JungHan Kim, Keunbada Son, Kyu-Bok Lee
J Dent Rehabil Appl Sci.2019;35(4):220-227.   Published online 2019 December 31     DOI: http://dx.doi.org/10.14368/jdras.2019.35.4.220
      
11 Comparison of CAD/CAM abutment and prefabricated abutment in Morse taper internal type implant after cyclic loading: Axial displacement, removal torque, and tensile removal force
Yuseung Yi, Seong-Joo Heo, Jai-Young Koak, Seong-Kyun Kim
J Adv Prosthodont.2019;11(6):305-312.   Published online 2019 December 18     DOI: http://dx.doi.org/10.4047/jap.2019.11.6.305
      
12 A new method to measure the accuracy of intraoral scanners along the complete dental arch: A pilot study
Mikel Iturrate, Erlantz Lizundia, Xabier Amezua, Eneko Solaberrieta
J Adv Prosthodont.2019;11(6):331-340.   Published online 2019 December 18     DOI: http://dx.doi.org/10.4047/jap.2019.11.6.331
      
13 Fabrication of additive manufacturing interim denture and comparison with conventional interim denture: A case report
Hyun-Ah Kim, Hyun-Pil Lim, Hyeon Kang, Hongso Yang, Sang-Won Park, Kwi-Dug Yun
J Korean Acad Prosthodont.2019;57(4):483-489.   Published online 2019 October 25     DOI: http://dx.doi.org/10.4047/jkap.2019.57.4.483
      
14 The fabrication of abutment crowns for existing removable partial denture using CAD/CAM: A clinical report
Min-Jeong Chae, Cheong-Hee Lee
J Korean Acad Prosthodont.2019;57(4):490-494.   Published online 2019 October 25     DOI: http://dx.doi.org/10.4047/jkap.2019.57.4.490
      
15 Full mouth rehabilitation in a patient with peri-implantitis: A case report
Nak-Hyun Choi, Young-Eun Cho, Eun-Jin Park
J Korean Acad Prosthodont.2019;57(4):416-424.   Published online 2019 October 25     DOI: http://dx.doi.org/10.4047/jkap.2019.57.4.416
      
16 Computer-aided design and manufacturing-based full mouth rehabilitation for a patient with excessive attrition and restricted vertical dimension: A case report
Jun-Ho Cho, Hyung-In Yoon, In-Sung Yeo, Jung-Suk Han
J Korean Acad Prosthodont.2019;57(4):495-505.   Published online 2019 October 25     DOI: http://dx.doi.org/10.4047/jkap.2019.57.4.495
      
17 Comparative evaluation of marginal and internal fit of metal copings fabricated by various CAD/CAM methods
Seung-Jin Jeong, Hye-Won Cho, Ji-Hye Jung, Jeong-Mi Kim, Yu-Lee Kim
J Korean Acad Prosthodont.2019;57(3):211-218.   Published online 2019 July 26     DOI: http://dx.doi.org/10.4047/jkap.2019.57.3.211
      
18 Implant treatment on anterior cross-bite of a patient who had orthognathic surgery 20 years ago
Kwang Man Park, Richard Leesungbok, Suk Won Lee
J Korean Acad Prosthodont.2019;57(3):245-253.   Published online 2019 July 26     DOI: http://dx.doi.org/10.4047/jkap.2019.57.3.245
      
19 Full mouth rehabilitation of patient with severe dental caries with implant fixed prosthesis fabricated with milling and 3D printing method: A case report
Taeyoon Kim, Jun-Suk Lee, Seoung-Jin Hong, Hyeong-Seob Kim, Kung-Rock Kwon
J Korean Acad Prosthodont.2019;57(3):288-295.   Published online 2019 July 26     DOI: http://dx.doi.org/10.4047/jkap.2019.57.3.288
      
20 Fabrication of complete dentures by conventional method and CAD/CAM milling: A case report
Youngchul Jung, Junsuk Lee, Seoung-Jin Hong, Kwantae Noh, Hyeong-Seob Kim, Ahran Pae
J Korean Acad Prosthodont.2019;57(3):296-303.   Published online 2019 July 26     DOI: http://dx.doi.org/10.4047/jkap.2019.57.3.296
      

 1 of 6